Laboratory stands for research of security systems’ components
Journal Title: Bulletin of the Military University of Technology - Year 2015, Vol 64, Issue 4
Abstract
The article presents two laboratory stands for research of basic security systems’ components. PIR detectors are the most widely used components in alarm systems. PIR detector element is a pyroelectric detector — its parameters determine the sensitivity of the detector and its resistance to “false alarms”. The completed laboratory stand allows for a comprehensive study of pyroelectric detectors, including work in a wide temperature range — to protect peripheral objects. The stand consists of radiation source (calibrator), the mechanical modulator, Peltier (change of temperature detector) and measuring instruments.The main purpose of access control system (ACC) is the selection of access to a wide variety of objects and technical systems. Realized laboratory set consists of 4 individual stands KD. Single stand KD is controlled by the transition controller module and base element is the door module. Depending on the desired configuration of the door module is equipped with: a smart card reader with keypad, Dallas chip reader, opening button or keypad. The access is defined for users — we have a weekly schedule, day and so-called time frames.[b]Keywords[/b]: pyroelectric detector, environment studies, access control system
Authors and Affiliations
Joanna Ćwirko, Robert Ćwirko
Keywords
Related Articles
- EP ID EP77476
- DOI 10.5604/12345865.1186228
- Views 76
- Downloads 0
Effects of nonlinearity of a contact layer between elements joined in a multi-bolted connection on preload values in bolts
In the paper, modelling and calculations of an asymmetrical multi-bolted flange connection atthe assembly stage are presented. A physical model of the joint is based on a flexible flange element that is connected with a...
Movable monitoring system of the electromagnetic emissions
The article presents the prototype of the movable electromagnetic wave monitoring system. It was built using the N6841A receiver offered by Agilent Technologies. Both the receiver and communication and control systems we...
Analysis of residual stress in 1.4539 austenitic steel joints welded with TIG method
The article compares the results of tests of residual stress determined based on Knoop microhardness measurements and obtained experimentally with the use of an x-ray diffractometer. Distribution of residual stress in th...
Dynamic relaxation method with arc-length parameter for analysis of reinforced concrete columns
The paper presents the modification of the dynamic relaxation method in order to increase its effectiveness in the range of the post-critical analysis. For this purpose, the arc-length parameter on the equilibrium path w...
Analiza wytężenia słupów żelbetowych metodą relaksacji dynamicznej
W pracy przedstawiono metodę analizy statycznego odkształcenia słupów żelbetowych z uwzględnieniem nieliniowości geometrycznej i nieliniowości fizycznych materiałów konstrukcyjnych.Dla stali zbrojeniowej zastosowano mode...