Load Shedding Strategy in Electrical Power System Using Under Frequency Relay
Journal Title: IOSR Journals (IOSR Journal of Electrical and Electronics Engineering) - Year 2018, Vol 13, Issue 3
Abstract
Stability of power system can be defined as its property which keeps several parameters in the balanced operating condition when sudden disturbances occur. In the stable operating condition, mechanical power input in the prime mover poses an equilibrium state with the electrical power output. Such condition makes all generators spin in synchronized speed.Disturbances in a power system tend to make out-of-balance situations, which in turn force the engineers to develop a better power system management. One of power system management that needs a high concern is load shedding strategies. It highly depends on system frequency, since the frequency is the most sensitive value affected by imbalance condition.Load shedding strategy uses frequency relays as the devices to break the connection of circuit breakers by measuring system frequency. The relays can be programmed to break specific circuit breakers if the system frequency reaches a defined value set by programmers. By inspecting this strategy, there is a high expectation to make a better power system, especially in 500 kV interconnected power system in Java-Madura-Bali.
Authors and Affiliations
Andrik Sunyoto, Hadi Suyono, Abraham Lomi
Keywords
Related Articles
- EP ID EP388732
- DOI 10.9790/1676-1303011219.
- Views 110
- Downloads 0
Sustainable Biodiesel Reactor Prototype Energetically Powered By Solar Energy
The study of routes aiming the implementation and use alternative energy sources has increased exponentially during the last decades, due to reduction of petroleum reserves and environmental damage related to fossil fuel...
Energy Meter Monitoring Over Internet of Things
The Existing domestic Energy meter reading systems universally exist many problems, such as difficulty in construction, too narrow bandwidth, too low rate, poor real time, not two way communication quickly etc. To solve...
Academic Study Trends in Engineering and Basic Science
In this study, engineering, numerical sciences, mathematical statistics and technological studies conducted by the academic staff of Bitlis Eren University have been evaluated. The main purpose here is to determine the a...
Comparison of Solar Photovoltaic Energy Systems Fixed Installation configuration with Single Tracking System
This paper describes the fixed PV systems tilt angle and the single tracking system. It looked at the performance of each system in terms of the voltage output and compares the two to find a better performing system. Thi...
Design and Implementation of New Converter Topology for Electrosurgical Units
Electrosurgery is the process in which high frequency current is applied to human body part for the purpose of surgical operations like cutting, dessication, fulguration etc. While performing electrosurgery, output power...