Low Power And High Performance Current Steering DAC Using Different GDI Logics
Journal Title: IOSR Journal of Electronics and Communication Engineering(IOSR-JECE) - Year 2018, Vol 13, Issue 3
Abstract
The current steering digital-to-analog converters (DAC) carry out a vital role in data-processing systems like communication systems. Digital-to-analog (DAC) converters used in modern communication systems mainly for linearity, effectiveness, and for high speed applications. The segmented approach of DAC in proposed work is mainly used for minimizing power dissipation, chip area. In general DAC have a tendency to operate at high rate of sampling, the current switches will affect the output with glitches because the transitions made at high sampling rate. In digital-to-analog converters decoders are designed with conventional CMOS logic, which are having more power dissipation, chip area than the proposed Gate Diffusion (GDI) Input logics. In this paper to minimize the power dissipation of decoder circuit in DAC, binary-thermometer decoder is implemented with GDI, Full-swing (FSGDI) and Transmission (TSGDI) logics. This method has been successfully shown for 8-bit 500-MHz segmented-current steering DAC having a less number of transistors, which results in low power dissipation.
Authors and Affiliations
G. Maheswara Murthy, B. Srinivas
An ICTF-TPWC Approach To Reduce PAPR of The OFDM System
One of the important factor to be considered in a communication system is its peak to average power ratio. In this paper an effective technique named Iterative Companding Transform and Filtering –Two piecewise Companding...
DVB-T2 Transmission System in the GE-06 Plan
Albania is in last steps of full digitization of audiovisual transmission as an obligation derive from ITU Agreement GE-06 “On the planning of terrestrial digital broadcasting service in parts of Regions 1 and 3, in the...
A very small Dual-Band MIMO Slot Antenna for WLAN and Wi MAX Applications
A very small dual band two element MIMO antenna for wireless local area network (WLAN) and Worldwide Interoperability for Microwave Access (WIMAX) applications is presented in this project.A microstrip line-fed antenna w...
Design of Microstrip Patch Antenna for 5g Applications
This paper is embedded with microstrip patch antenna that is constructed for future 5G wireless communications. The antenna has a compressed structure of 11mm x 8 mm x 0.5mm, including the ground plane. This antenna is d...
Performance of (2x2) MIMO Communication Systems for Various PSK Modulation Schemes
As the demand of bandwidth is escalating along with intolerance for errors and latency, datacommunication engineers are looking for new ways to utilize the available bandwidth to the maximum and improve the quality of tr...