Low Temperature Impact Toughness of Self-shielded Flux Cored Wire for Pipeline Steel
Journal Title: 河南科技大学学报（自然科学版） - Year 2017, Vol 38, Issue 2
Abstract
Taking BaF_2-Fe_2O_3-Al-Mg slag system self-shielded flux cored wire as research object,the effects of residual Al,N and O mass fraction on low temperature impact toughness of the deposited metal in welding wire was analyzed by low temperature impact toughness test. The microscopic structure of deposited metal and slag inclusion was observed via metallurgical microscopy and scanning electron microscope. The results show that the low temperature impact toughness of deposited metal in welding wire is decreased with the increase residual Al mass fraction. When residual Al mass fraction is low,the deposited metal slag inclusion is mainly circular Al_2O_3,and the weld center is fine granular bainite microstructure with higher low temperature impact toughness. When residual Al mass fraction is high,the irregular shape deposited metal slag inclusion is mainly aluminum nitride,and the weld center is granular bainite microstructure and small ferrite with lower low temperature impact toughness. The reasonably control of trace element mass fraction in welding wire is good for higher low temperature impact toughness.
Authors and Affiliations
Zhenbiao ZHU, Rungang YAO, Chun GUO
Keywords
Related Articles
- EP ID EP477984
- DOI -
- Views 64
- Downloads 0
Application of Phase Adjustment of Fuel Cell DC-DC Converter
The output power of the fuel cell direct current-direct current ( DC-DC) converter under light-load conditions were relatively low. If the operation of all electronic devices was still retained, the efficiency of the DC-...
Effects of Monoammonium Glycyrrhizinate on Kidney Function of Laying Hens
In order to investigate the effect of monoammonium glycyrrhizinate ( MAG) on kidney function in laying hens, a total of 60 Hy-line brown laying hens at the age of 320 days were randomly divided into 5 groups.MAG in drink...
Optimization of Phosphorylated Modification Process of Ovalbumin Peptide
On the basis of determining the optimum process conditions for enzymatic preparation of ovalbumin peptide,the modification process of ovalbumin phosphorylation after enzymolysis was studied. Taking the phosphorylation de...
Experiment on Reducing Emissions of Non-road Diesel Engine
Effects of injection pressure,injection timing,injector hole diameter and injector nozzle protrusion on exhaust emissions from a N490 naturally aspirated direct injection diesel engine were studied in order to reduce its...
Design Methodology of Steering Mechanism on Balance-arm Suspension Vehicle
To solve the problem that steering trapezoidal mechanism cannot be arranged at the vehicles with balance-arm suspension, a mechanical steering transmission scheme composed of spatial linkage mechanism was proposed.The an...