Machining millimeter-scale deep holes in SiCf/SiC material using femtosecond laser filamentation effect
Journal Title: Materials Science: Advanced Composite Materials - Year 2018, Vol 2, Issue 3
Abstract
A 3.5 mm thick SiCf/SiC material was drilled in air environment using a femtosecond laser filament effect. The surface morphology of deep micropores was observed by scanning electron microscopy and the depth and profile of the pores were observed using μm-CT. The variation of entrance diameter, exit diameter and depth variation with laser focus position and processing time was further analyzed. The results showed that as the processing time of femtosecond laser increases, the ablation threshold of the material reached saturation. The exit and entrance diameter also stopped increasing and the aperture tend to saturate. The focus entered the interior of the material, allowing the location of the peak power near the surface of the material. So the entrance aperture was of good quality and the exit aperture was round.
Authors and Affiliations
Jie Zhao, Wenjun Wang, Ruijia Wang, Jianlei Cui
Keywords
Related Articles
- EP ID EP679019
- DOI -
- Views 205
- Downloads 0
Effect of repair methods on mechanical behaviors of repair area in composite laminate fuselage skin with different damage size
Composite laminates are widely used in the large civil aircrafts because of their excellent mechanical properties. The maintenance and repair of composite laminates become essential. In this paper, a new adhesive-rivet h...
Preparation and Forming Technology of Particle Reinforced Aluminum Matrix Composites
This paper introduces the performance and preparation technology and forming technology of particle reinforced aluminum matrix composites. The application status of particle reinforced aluminum matrix composites is illus...
Mechanical and structural properties of termite soil as a partial replacement to cement for different applications
This paper presents the results of the experimental and theoretical study of the mechanical and structural properties of termite soil as a partial replacement to cement for different applications, especially in the build...
Rocess Design of Fiber Reinforced Magnesium Matrix Composites
This paper chooses magnesium as the matrix of composite materials, selects carbon fi ber as reinforcement, and designs the composite scheme according to the structure and performance of Mg-based composites. The performan...
Correlations between dynamic fragility, activation energy and glass transition temperature in polymeric composite materials: An overview from literature
Here, it is compiled data from literature for glass transition temperature (Tg) and activation energy (Ea) for different types of polymeric composite materials. A correlation among both parameters and dynamic mechanical...