Material Balance in a Blast Furnace, when Replacing Coke with Coal Dust
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2017, Vol 40, Issue 4
Abstract
The paper presents the technology for the preparation and burning of coal dust in the blast furnace, as well as the material balance, - without and with the in - of coal dust. On the basis of the comparative analysis, measures are proposed to replace the amount of coke with coal dust in the range of 0.8-1 coke / CDI.
Authors and Affiliations
Adrian VASILIU
Keywords
Related Articles
- EP ID EP573498
- DOI -
- Views 57
- Downloads 0
Surface Hardening Over 38MoCrAl09 Steel by YAG:Nd Pulse Laser
Laser offers unique capabilities for high energy concentrations at small surfaces. Factors that have influences over interactions between laser beam and steel surfaces have very high control. Pulse laser YAG:Nd is usuall...
New Achievements in Manufacturing of Church Bells
Analysis, modelling and design of the bells are a topical issue for manufacturers of bells, in general, and for church bells manufacturers in particular. The transition from manual design of a bell to that achieved with...
Study on the Soil Chemical Pollution in the Area of the Residual Bauxite Lake "Mineri" – Tulcea
The paper presents a study on the impact of chemical pollution of the soil, from residual bauxite lake, from "Mineri", in the areal of Tulcea. Soil samples were taken from the lake, and from the immediate area of the lak...
Study Regarding Gravimetrical Corrosion of the Superficial Layers Obtained through Electrical Discharge
The experimental research was made on superficial layers laid-down through electrical sparking on the steel carbon OLC 45 probes, the used electrode being made from a corrosion resistant material (Copper). The probes was...
The Mechanism of Phase Transformation to Obtain Zinc-Iron Coatings
Important changes in the ratio of constitutive phases take place during heating of galvanized parts due to Zn coating layer changed into Zn-Fe alloy. The work deals with a mathematical correlation between diffusion pheno...