مدل‌سازي سينتيکي راکتور بستر متحرک ناپيوسته متوالي بيوفيلمي با جريان پيوسته در تصفيه فاضلاب مصنوعي
Journal Title: آب و فاضلاب - Year 2016, Vol 27, Issue 5
Abstract
Kinetic Modeling of Synthetic Wastewater Treatment by the Moving-bed Sequential Continuous-inflow Reactor (MSCR) It was the objective of the present study to conduct a kinetic modeling of a Moving-bed Sequential Continuous-inflow Reactor (MSCR) and to develop its best prediction model. For this purpose, a MSCR consisting of an aerobic-anoxic pilot 50 l in volume and an anaerobic pilot of 20 l were prepared. The MSCR was fed a variety of organic loads and operated at different hydraulic retention times (HRT) using synthetic wastewater at input COD concentrations of 300 to 1000 mg/L with HRTs of 2 to 5 h. Based on the results and the best system operation conditions, the highest COD removal (98.6%) was obtained at COD=500 mg/L. The three well-known first order, second order, and Stover-Kincannon models were utilized for the kinetic modeling of the reactor. Based on the kinetic analysis of organic removal, the Stover-Kincannon model was chosen for the kinetic modeling of the moving bed biofilm. Given its advantageous properties in the statisfactory prediction of organic removal at different organic loads, this model is recommended for the design and operation of MSCR systems.
Authors and Affiliations
Mohammadreza Khani, Seyyed Mostafa Khezri, Vida Gholamiparvar Masooleh
Keywords
Related Articles
- EP ID EP179515
- DOI -
- Views 75
- Downloads 0
بهينه‌سازي حذف ترکيب دارويي سيپروفلوکساسين با فرايند انعقاد الکتروشيميايي با مدل آماري رويه پاسخ از محيط‌هاي آبي
Optimization of Electrocoagulation via Response Surface Methodology to Remove Ciprofloxacin from Aqueous Media The response surface statistical model developed via the central composite design (CCD) is a tool for optimi...
سنتز کامپوزيت ژل کربوکسي متيل سلولز-مونت مورلونيت و کارايي آن در حذف کاتيون مس دو ظرفيتي از محلول‌هاي آبي
Synthesis of Carboxymethyl Cellulose-Montmorillonite Hydrogel Composite and Studying its Function for Copper Cation Removal from Aqueous Soluti In this study, composite hydrogel was provided based on carboxymethyl cellu...
بهينه‌سازي کيفيت آب در شبکه‌هاي توزيع بر اساس وضعيت دور پمپ، نحوه تزريق کلر و نوع روش تحليل
Optimization of Water Quality in Distribution Networks Based on Variable Chlorine Injection Regime, Pump Speed, and Analytical Methods Used Recent years have witnessed a growing interest in the optimal operation of water...
ارزيابي تأثير نصب پمپ و مخزن آب بر کيفيت آب مصرفي داخل ساختمان‌هاي مسکوني و مؤسسات، مطالعه موردي: شبکه توزيع آب محدوده سه راه آذري شهر تهران Investigating the Effect of Pump and On-Site Reservoir Inside Buildings and Major Utilities on Water Quality, Case Study: Water Distribution Network in Tehran Azari District
Abstract Requirements of the Issue Sixteen of the Iranian National Building Code demand the protection of the drinking water network inside residential buildings over 4 stories or with more than 10 units. These building...
تأثير زمان ماند هيدروليکي بر عملکرد بيوراکتور غشايي در تصفيه فاضلاب شهري Effects of Hydraulic Retention Time on the Performance of a Membrane Bioreactor Treating Municipal Wastewater
Effects of Hydraulic Retention Time on the Performance of a Membrane Bioreactor Treating Municipal Wastewater H. Falahati Marvast1 , A. Karimi Jashni2, Gh.R. Rakhshandehroo3 1. PhD Student of Civil and Environmental En...