Measurements of Percussion Cap Parameters

Abstract

Investigation results of percussion cap (KWM-3 as example) parameters such as initiation mean energy (130 mJ approx.), their standard deviation (30 mJ approx.) as well as delay time (450 s at an average), firing pin deepening (350 m at an average) and energy absorbed (< 150 mJ) up to the initiation moment were presented. The measurements were conducted with an aid of the facility and methods worked out in the AFIT (ITWL). The change of delay time, firing pin deepening and energy absorbed versus energy used for initiation were shown.

Authors and Affiliations

Jarosław DĘBIŃSKI, Andrzej DŁUGOŁĘCKI, Edward OLEJNICZAK

Keywords

Related Articles

Wyniki pierwszego etapu projektu rozwojowego RAWAT

W dniu 19.12.2012 r. Konsorcjum Naukowe w składzie: Instytut Techniki Uzbrojenia Wydziału Mechatroniki i Lotnictwa Wojskowej Akademii Technicznej im. Jarosława Dąbrowskiego (WAT) w Warszawie (lider) i Fabryka Broni „Łucz...

Inhibited Recoil in the Special Object with the Magnethoreological Damper TR-1.0M

This study is an attempt to explore the impact of introducing the system controlling the recoil effect by the use of the controlled magnetorheological damper (MR) to the weapon – gunner system. The analyzed modification...

Replacement of PETN by Bicyclo-HMX in Semtex 10

Bicyclo-HMX (BCHMX) was studied in the form of a plastic explosive bonded by the plastic matrix of the explosive Semtex 10 and the results were compared with the original Semtex 10 which contains PETN as an explosive fil...

Karabinek reprezentacyjny MSBS-5,56R systemu MSBS-5,56

W dniu 3 maja 2016 r. na Placu Zamkowym w Warszawie, podczas uroczystości państwowych z okazji 225. rocznicy uchwalenia Konstytucji 3 Maja – w obecności Prezydenta RP, najwyższych władz Rzeczpospolitej oraz licznie zebra...

Wybrane problemy dynamiki, sterowania i konstrukcji samobieżnego działka wodno-pianowego przeznaczonego do pracy w warunkach prowadzenia akcji ratowniczo-gaśniczych

W artykule przedstawiono wstępne przygotowania do podjęcia prac nad projektem zgłoszonym do finansowania w Narodowym Centrum Badań i Rozwoju w ramach Programu Badań Stosowanych. Realizacja projektu doprowadzi do zbudowan...

Download PDF file
  • EP ID EP62861
  • DOI -
  • Views 108
  • Downloads 0

How To Cite

Jarosław DĘBIŃSKI, Andrzej DŁUGOŁĘCKI, Edward OLEJNICZAK (2013). Measurements of Percussion Cap Parameters. Problemy Mechatroniki. Uzbrojenie, lotnictwo, inżynieria bezpieczeństwa, 4(2), 43-52. https://europub.co.uk/articles/-A-62861