Mechanics of Forming thin Ring Plates
Journal Title: Հայաստանի գիտությունների ազգային ակադեմիայի տեղեկագիր․ Մեխանիկա - Year 2009, Vol 62, Issue 4
Abstract
The analysis of forming thin ring plates in case of the big plastic deformations taking into account the interconnected change of material thickness and deformation hardening is carried out. It is established, that in case of isotropic hardening the equations characteristing plastic flat intense condition, are displayed on π -planes of the plasticity cylinder in the form of proportional dependence between speeds of radial pressure change and equivalent deformation. Analytical dependences for distribution of the main pressure and deformations are obtained at biaxial homonymic and heteronymic strained conditions for ideally stiff-plastic and hardening models of the deformable material.
Authors and Affiliations
E. A. Nazaryan, N. N. Arab, M. M. Arakelyan, A. S. Markosyan
Keywords
Related Articles
- EP ID EP602196
- DOI -
- Views 70
- Downloads 0
The investigation of organo-plastic creep in the case of uniaxial stress.
c
Stress concentration in magnetosoft body with crack caused by external magnetic field.
c
Homogeneuous solutions of the theory of deformation of multi-layered half-space and their application.
c
Load transfer from two symmetrical stiffeners to an infinite plate with a circular hole weakened by two symmetrical radial cuts.
c
On strength and plasticity of laminated fabric.
c