Methods of Jet Control in Ventilation
Journal Title: Вентиляція, освітлення та теплогазопостачання - Year 2017, Vol 22, Issue
Abstract
Inlet jet parameters are one of the influencing factors on microclimate parameters in rooms. There are many solutions of air distributing technique. Some of them are widespread; others are special purposes solutions and applied on sporadic objects. Nevertheless, there is not enough detailed classification of jet control methods, used in the air distributing solutions. In this work, such classification is proposed, based on thousands of inventors certificates and patents. For easier classification, the methods are systematized by four main groups: with flow turbulization, without significant turbulization, with flow stabilization and combined. Possibilities of jet range change is also shown. This classification is upgradable during the development of air distribution technique
Authors and Affiliations
V. Mileikovskyi
Keywords
Related Articles
- EP ID EP556428
- DOI -
- Views 50
- Downloads 0
Researches of Solar Heater for the Passive Solar Energy Systems
Experimental researches of passive solar heater of high thermal resistance, which consists of an air space between the transparent wall and the heat-light absorber, where the space is divided by inclined anti-convection...
Comparison of Constructions of Heat Accumulators with a Solid Heat Storage Material and Combined HeatStorage Material
One of the thermal energy storage technologies during the warm season, its preservation and future use is to create seasonal heat accumulators. As a source of heat during the warm period of the year for charging seasonal...
Influence on the Environment of a Thermal Power Plant on Wood Waste
The possibility to increase the effectiveness of the solar radiation energy usage up to 30^40 percent was established. This result was achieved by heating the energy source with increased flow rate during the expanding o...
Influence оf Thermo-Physical Properties оf Biomass оn Methane Formation іn the Household Bioreactors
The construction of domestic continuous action bioreactor has been proposed. The method of engineering calculation was offered to evaluate the performance of biogas plants, including the determination of the maximum numb...
Analysis of velocity profile geometry of laminar flow in a digonal duct
A velocity profile of stabilized laminar flow in digonal duct is analysed. The influence of axes length ratio on the Darcy coefficient is determined. When the ratio decreases the profile takes the saddle-like shape near...