Metro Vehicle Bogie Abnormal Vibration and Fatigue Failure
Journal Title: Urban Mass Transit - Year 2024, Vol 27, Issue 7
Abstract
Objective Due to the increase of metro operation mileages and track conditions complexity, abnormal bogie vibrations caused by wheel-rail wear often occur. Bogie frame serves as an important load-bearing component, requiring research on its structural integrity and vibration failure mechanism under abnormal vibration conditions. Method Taking a metro bogie frame as example, based on vibration transmission tests and dynamic stress data, a study is conducted on the abnormal vibration and beam fatigue failure causes of metro vehicles on a line during operation, analyzing the source of disturbance and vibration transmission path. Based on the results of frame working modal tests, the vibration acceleration and dynamic stress time-frequency characteristics at beam failure points when vehicle passing typical sections are analyzed. By analyzing influencing factors such as wheel polygon, rail corrugation, and vehicle operating speed, the amplitude and spectrum characteristics of beam dynamic stress are investigated. Result & Conclusion Before wheel reprofiling, the main measuring points where equivalent stress amplitude exceeds the limit are concentrated at the connections between beams and side beams, beams and small longitudinal beams, and the upper cable supports of beams. After wheel reprofiling, the equivalent stress amplitudes at all measuring points significantly decrease, far below the allowable stress amplitude. The main external excitation source causing beam cracking is the 5 to 8 order wheel polygon, and the exacerbated vehicle vibration caused by wheel off-roundness is the direct cause for fatigue failure of beam cable supports.
Authors and Affiliations
Wei ZHAO, Yi SUN, Lai WEI, Chaotao LIU, Sheng QU
Keywords
Related Articles
- EP ID EP742622
- DOI 10.16037/j.1007-869x.2024.07.038
- Views 17
- Downloads 0
Study on Deformation Control Value for Urban Rail Transit Foundation Pit Project
Objective Setting deformation control values for the monitored project and controlling the construction safety is a very important task in the construction of urban rail transit engineering, aiming to ensure the stabilit...
Research on Embedded Track System Vibration Transmission
Objective Embedded tracks have relatively high damping, providing good vibration and noise reduction performance. Therefore, it is necessary to study the vibration reduction mechanism of embedded track system. Method Tak...
Research on Real-time Wheel-rail Force Identification Network of Rail Transit under Compound Line Conditions
Objective Wheel-rail force plays an important role in the study of train running state, wheel off roundness and rail corrugation in rail transit. Current wheel-rail force identification methods have some problems, such a...
Research and Application of Crack-resistance Technology for Underground Station Side-wall Concrete Structure
[Objective] Cracking in the concrete of urban rail transit project underground station side-walls can pose a threat to the structural safety of metro stations. It is essential to analyze the causes of cracking in the con...
Simulation Research on Metro Train Control Circuit Based on Network Topology
[Objective] To meet the training needs of metro drivers and maintenance personnel in studying metro control circuit principles, a MTCCS (metro train control circuit simulation system) is designed to address the issues of...