Microcontroller Based Colour Identification System
Journal Title: IOSR Journals (IOSR Journal of Electrical and Electronics Engineering) - Year 2018, Vol 13, Issue 1
Abstract
A microcontroller based system using P89V51RD2 microcontroller for colour identification system is designed and developed. It is based on the principle that the analog voltages of the sensor converted to RGB colours. The sensor OPT 301 is an opto-electronic integrated circuit containing a photodiode and transimpedance amplifier on a single dielectrically isolated chip. This sensor provides an analog input depending upon the colour sensed by it. This analog voltage may then convert into digital form using ADC (analog to digital converter) interfaced with the microcontroller. Digital output varies depending upon the variation in the colours sensed. The P89V51RD2 is a low-power, high-performance CMOS 8-bit microcontroller used in the present study. Further, an LCD module is interfaced with the microcontroller in 4- bit mode, which reduces the hardware complexity. Software is developed in C using Keil’s C-cross compiler. The data stored in the microcontroller along with the name of the colour. The paper deals with the hardware and software details.
Authors and Affiliations
B. Brahmaiah, R Rama Mohan, CH. V. V. Ramana
Keywords
Related Articles
- EP ID EP388585
- DOI 10.9790/1676-1301027780.
- Views 134
- Downloads 0
Analysis and Development of a Reliability Forecasting Model for Injection Substation
This paper is aimed at analyzing and developing a reliability forecasting model for an Injection Substation; a case study of Ugbowo 33/11kV Injection Substation. This project seeks to determine the current reliability st...
A Study Of The Electronic Band Structure And Vibrational Properties Of The Chalcopyrite Cuals2
The electronic band structure of the ChalcopyriteCuAlS2and its vibrational properties using the pseudopotential method within density functional theory (DFT) and density functional perturbation theory (DFPT) frameworks r...
Compared with the Effects of Two Measurement Methods on the Luminescent Properties of LED Phosphors
Accurate measurement of LED phosphor performance parameters, the traditional test method commonly used is to use a laser or xenon lamp as an incident light source, which is not only expensive, but also the results are no...
Mind Controlled Wheelchair
The paper deals with engineering an electric wheelchair from a common wheelchair and then developing a Brain Computer Interface (BCI) between the electric wheelchair and the human brain. A portable EEG headset and firmwa...
Evaluating the Performance of Unified Power Flow Controller (UPFC) On Fault Current Limitation in the Nigrian 330kv Power System.
The Performance of Unified Power Flow Controller (UPFC) on Fault Current Limitation in a 330kV Power Network. The SIMULINK model of the Nigerian 330kV system was developed and the model of the UPFC was developed and inte...