Microstructural Characteristics of Sintered Powder Metallurgy Alloys
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2014, Vol 37, Issue 4
Abstract
The purpose of this paper is to study the influence of processing parameters on the microstructural characteristics of sintered powder metallurgy alloys. The specimens were produced from atomised iron powders with different sizes (<45, 45-63, 63-100, 100-150, >150 μm). They were compacted at pressures of 600 MPa and sintered for 30 minutes and 120 minutes at 1150 ºC, respectively. The porosity of the sintered samples was analyzed according to their microstructural characteristics and chemical composition.
Authors and Affiliations
Mihaela MARIN, Florentina POTECAŞU, Octavian POTECAŞU
Keywords
Related Articles
- EP ID EP584668
- DOI -
- Views 88
- Downloads 0
A New Configuration for Cast Bearing Support from the Work Roll as Part of a Thick Sheet Rolling Mill
In this work is made an optimization of configuration for casting bearing support of backup rolls, with Finite Element Method. This program is used for configuration of parts or subassemblies realized from cast iron. The...
Obtaining and Characterisation of Thermoresistive Pigments
The paper describes the obtaining and chemical and physico-structural characterisation of a green thermoresistive pigment. The pigment is made of ZnO dopped with Sb, Bi, Cr, Co and Fe oxides and it is used at mosaics and...
Object Oriented Architecture for Product Information System Engineering
The product information system is an organizational device for regulating the creation, circulation, use and evolution of the information assets of the product definitions. It refers to all the information that defines h...
The Influence of the Temperature Regime on the Mechanical Properties of the Thick Steel Sheets from Carbon and Low-Alloy Steels, Laminated to Thicknesses Less than 40 mm
Steel remains the most used material in the machinery industry, the construction of oil and gas pipelines, etc. Hot rolling is no longer a simple means of obtaining the final geometry of products in the steel industry, b...
Reducing the Zinc Emissions by Upgrading of Steel Scraps Quality
The steel production is one of the major sources of heavy metals emissions to the environment. There are several possibilities for prevention and minimization of these pollutants. Emission reduction measures focus on add...