Microstructure and Mechanical Properties of Hot Pressed 16.5CR Ferritic ODS Steel Developed Through Mechanical Alloying
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2018, Vol 8, Issue 2
Abstract
Two different ferritic oxide-dispersion-strengthened (ODS) steels compositions Fe–16.5Cr–0.89Mn-0.3Y2O3-2ZrO2 (Sample1) and Fe–16.5Cr–0.89Mn-0.3Y2O3-2ZrO2-2Al (Sample2) were prepared through Mechanical Alloying (MA) and X-Ray Diffraction (XRD) pattern were taken at different time intervals for confirming the Nano-crystallite size. Milled powders were consolidated at 1170OC at three different pressure levels of 30, 40 and 60 MPa respectively. Densification studies, micro-structural examination ,and mechanical properties evaluation were analyzed and reported in the current study. MA of the hot pressed powder at 60 MPa obtained the highest density, hardness ,and tensile strength compared with another pressure compact irrespective of its composition. Aluminum addition in the ferritic ODS steel lowers the density, hardness ,and elongation of the ferritic ODS steel samples
Authors and Affiliations
Keywords
Related Articles
- EP ID EP347466
- DOI 10.24247/ijmperdapr201882
- Views 53
- Downloads 0
An Inverse Kinematics Analysis of Space Station Remote Manipulator System (SSRMS) Using Genetic Algorithms
The importance of RobotArms (Serial Manipulators) is increasing rapidly in the last few years in space, industrial and medical applications. An important part of Robot Arms is to achieve desired pose (position and orient...
Accident Prevention Eye Tiredness Detection Using Image Mining
Driver exhaustion is the majority frequent reason for the deadly highway accident around the earth. This shows that in the motor vehicle industry, particularly, anywhere a driver of a serious motor vehicle is frequently...
An Effect of Stress Relieving on the Microstructural and Mechanical Properties of Mg-3Zn-1Cu-0.7Mn/ Al2O3 Composite Synthesized by Powder Metallurgy
A composite based on Mg-3Zn-1Cu-0.7Mn alloy reinforced withAl2O3was synthesized using blend-press-sinter powder metallurgy route and hot extruded at 400oC. The study concentrates on investigating the effectiveness of alu...
Integration of Biodiesel and Biogas Plants for Cost Effective Biofuel Generation
Bio fuels such as biogas and biodiesel attract increasing attention all over the world as a substitute or mixture for fossil fuels in automobiles. Transesterification is the process that is used for producing biodiesel w...
The Optimization of Tool Life by Fillet Radiuson Cold Forging Die Using Finite Element and Low Cycle Fatigue Theory
Tool life prediction is an important thing in the metal forging industry. To prolong die life, proper die design is crucial. The objective of this work is to study the fillet radius effect to tool life on taperd cold for...