Mitoxantrone removal by electrochemical method: A comparison of homogenous and heterogenous catalytic reactions
Journal Title: UNKNOWN - Year 2017, Vol 4, Issue 4
Abstract
Background: Mitoxantrone (MXT) is a drug for cancer therapy and a hazardous pharmaceutical to the environment which must be removed from contaminated waste streams. In this work, the removal of MXT by the electro-Fenton process over heterogeneous and homogenous catalysts is reported. Methods: The effects of the operational conditions (reaction medium pH, catalyst concentration and utilized current intensity) were studied. The applied electrodes were carbon cloth (CC) without any processing (homogenous process), graphene oxide (GO) coated carbon cloth (GO/CC) (homogenous process) and Fe3O4@GO nanocomposite coated carbon cloth (Fe3O4@GO/CC) (heterogeneous process). The characteristic properties of the electrodes were determined by atomic force microscopy (AFM), field emission scanning electron microscopy (FE-SEM) and cathode polarization. MXT concentrations were determined by using ultraviolet-visible (UV-Vis) spectrophotometer. Results: In a homogenous reaction, the high concentration of Fe catalyst (>0.2 mM) decreased the MXT degradation rate. The results showed that the Fe3O4@GO/CC electrode included the most contact surface. The optimum operational conditions were pH 3.0 and current intensity of 450 mA which resulted in the highest removal efficiency (96.9%) over Fe3O4@GO/CC electrode in the heterogeneous process compared with the other two electrodes in a homogenous process. The kinetics of the MXT degradation was obtained as a pseudo-first order reaction. Conclusion: The results confirmed the high potential of the developed method to purify contaminated wastewaters by MXT
Authors and Affiliations
Mohammad Rostamizadeh
Keywords
Related Articles
- EP ID EP283489
- DOI 10.15171/EHEM.2017.26
- Views 119
- Downloads 0
Chromium removal and water recycling from electroplating wastewater through direct osmosis: Modeling and optimization by response surface methodology
Background: Considering the carcinogenic effects of heavy metals, such as chromium, it is essential to remove these elements from water and wastewater. Direct osmosis is a new membrane technology, which can be a proper a...
Study of Co(II) adsorption from aqueous solution using protein granules produced from chicken feather
Background: Co(II) constitutes a part of vitamin B12, hence, it is necessary for human health. However, at concentrations higher than the permissible limits, humans and animals suffer adverse chronic effects. It is neces...
An environmentally friendly soil improvement technology for sand and dust storms control
Background: Dust storms occur when unchecked, strong, or turbulent winds combine with exposed loose and dried soil surfaces. Sand and dust storms have a significant impact on society, economy, and environment at local, r...
Evaluation of removal efficiency of phenol from synthetic aqueous solutions by Citrullus colocynthis seed ash
Background: Phenol is a prevalent pollutant found in many industrial wastewaters, and it is paid singular attention because of its special features like high toxicity, carcinogenic properties, and vital gathering ability...
Adsorption of copper, lead and cadmium from aqueous solutions by activated carbon prepared from saffron leaves
Background: Industrial development has caused the release of various pollutants including heavy metals into the environment. These toxic compounds are extremely dangerous to living beings and the environment due to their...