Model and Analysis of Desktop Wind Tunnel
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2018, Vol 8, Issue 1
Abstract
This paper is on model and analysis of desktop wind burrow. Wind Tunnel (WT) is equipment used to research a communication between rigid body flows in WT that can be performed in term of observing physical stream phenomenon, for example, laminar, turbulent streams, vortex flows. It’s also able to measure aerodynamic quantities, but the center of attention of this report will be on the model of WT and doing analysis on it. It’s about application of similitude theory on the prototypes. The main step is to scale down the shape and dimension of the prototype, or real model into this model. This similitude theory application will save money and space toward industries. The components of a WT and the main objective of each are given below. The significance of delivering uniform airflow to the test section is considered with respect to the impact of non-uniform flow on the measured performance of equipment, which is shown to be velocity-dependent. A straightforward approach for constructing a WT with great test section flow is described
Authors and Affiliations
MD. KHALEEL, S. ALKA, MARAMPALLI SHILPA
Keywords
Related Articles
- EP ID EP279970
- DOI 10.24247/ijmperdfeb201857
- Views 94
- Downloads 0
AN ELIMINATION TYPE OF POKAYOKE- A GAME CHANGER TOOL IN THE PROPELLER SHAFT ASSEMBLY
Monitoring the Industrial OEE (Overall Equipment Effectiveness) [3],[4]is now a day’s a very essential concern for optimizing the use of the resources and tracking the efficiency of the manufacturing organization. To pro...
An Experimental Investigation on Glass /CarbonFibre Hybrid Composite Material
The primary target of this work is to study the three samples of glass fibre /carbon fibre strengthened with three distinctive proportion layers with epoxy pitch. The soundness of samples tested by using non-destructive...
The Demand Forecasting: A Comparative Review of Conventional and Non-Conventional Techniques
Since the inception of competitive markets, demand forecasting has gradually become a fundamental process for all types of the industry’s decision making mechanisms. Over the years, the bulk of research was focussed on t...
Influence of Fiber Orientation on the Properties of Composites
Damage pattern on the surface of laminate with fiber orientations (00/150), (00/300), and (00/450) have been studied. E-glass/Epoxy composite laminate of thickness 4mm with size 100mmx100mm clamped on all the edges has b...
Studies on Mild Steel Particulates Reinforced Duralumin Composite Fabricated Through Powder Metallurgy Route
In the present study Duralumin(DA) based Mild Steel particles (MSp-6% wt. and 12% wt.) reinforced composite are fabricated by cold compacting the milled powders. The mechanically mixed powders are compacted in a die cavi...