Model of a filtration process using a membrane filter with uniform transmission structure
Journal Title: Bulletin of the Military University of Technology - Year 2017, Vol 66, Issue 3
Abstract
The paper presents a model of a microfiltration filter for separation of biological microparticles from body fluids, including peripheral blood. The model used a single membrane filter with a homogeneous 2D transmission structure. In the model, the individual sieve with a uniform transmission structure in 2D space was applied. Because of the required survival of biological particles, the presented model was limited to the narrow filtration conditions that guarantee biological activity of these particles. In this model, the filtration process proceeds in the gravitational field without the involvement of external forces forcing or inhibiting the filtration process. Based on this model there were given basic dependencies describing the required filtration process conditions, such as filtration time and internal forces for particle migration in the filtered body fluid. The basic relationships between the height of the filtered column, duration of the process, and average fluid expenditure of the filtration process for different shapes of the channels molecular drainage lines filter have been determined. Based on this data, the directions of further works on improving the presented model of molecular filtration of biological particles for enriching selected biological fractions have been described. Keywords: micro filtration, filter sieves, filter membranes, filtration of biological particles, filtration membranes
Authors and Affiliations
Andrzej Górka
Keywords
Related Articles
- EP ID EP229727
- DOI 10.5604/01.3001.0010.5397
- Views 80
- Downloads 0
Analysis of using porous asphalt on the surfaces of bridges
The article concerns the analysis of the use of modern technology while paving the road bridges. It shall assess the possibility of using porous asphalt paving of road bridges. Based on the results of laboratory tests of...
Porównanie właściwości elektrooptycznych ciekłokrystalicznych kompozytów typu PDLC w zakresie widzialnym i bliskiej podczerwieni
Porównano właściwości elektrooptyczne konwencjonalnych kompozytów typu PDLC (Polymer-Dispersed Liquid Crystals) w obszarze widzialnym i bliskiej podczerwieni dla przypadku efektu elektrooptycznego elektrycznie indukowane...
Model materiału zastępczego w analizie zginanego przekroju żelbetowego
W pracy przedstawiono metodykę wyznaczania parametrów wytrzymałościowych i odkształceniowych dla hipotetycznego modelu jednorodnego materiału zastępczego w żelbetowym przekroju poprzecznym poddanym czystemu zginaniu. Par...
AC/DC transfer standards calibration in Central Military Calibration Laboratory
The article discusses the method used at the Central Military Calibration Laboratory to calibrate Fluke 5790 AC/DC transfer standard with the reference transfer standard Fluke 792A. It presents the measurement equation a...
Porous slide sleeves sintered from iron powder with addition of hexagonal boron nitride
In this article there are presented some selected results of research works on new generationporous slide bearings, sintered from Höganas NC .100.24 iron powder, with addition of hexagonalboron nitride h-BN instead of co...