Model Order Reduction of Bolting and Feasibility Evaluation
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2017, Vol 7, Issue 5
Abstract
The main idea in the present age, is to improve efficiency of computation, by reducing computational space and time eventhough, we have high end computing power. It is still preferred to use minimum computation time and space. We have attempted in this study, to try and reduce a 3D bolt model, to a 2D model, by using the plane stress approach. The objective of the present study is to evaluate the feasibility of reducing the 3D model, into 2D. The requirements of the 2D Bolt, is to match the mass of the actual bolt, and to match the axial and bending stiffness of the actual bolt, and simulate the effects of 3D bolt in 2D, as close as possible to 3D including contact pressures. Symmetry conditions have been used on the cylinder. Elements and meshes have been discussed, and the best technique to simulate the 3D bolt in 2D, has been proposed.
Authors and Affiliations
Siddharth Ghosh, Swathi Reddy S. R, Benjamin Rohit, Manushree Chaturvedi
Keywords
Related Articles
- EP ID EP245157
- DOI -
- Views 108
- Downloads 0
Automation: Petrol Depths Status Via Level Sensor and Wireless Sensor
Petroleum storage wells are uploading petrol to their bunk well day by day at any time. Petroleum bunks are holding manual status updates of remaining petrol capacity in their wells for each period. An employee will chec...
Wear Characteristics of Al 6061-Tib2 Metal Matrix Composite Developed by in-Situ Technique
Metal Matrix Composites (MMCs) are extensively used in structural, automobiles and aerospace employments because of their enhanced mechanical characteristics. Wear tests are essential to study the performance level of MM...
Prediction of Plasma Arc Cutting Performance for SS-304 Material using Artificial Neural Network
A number of cutting parameters are responsible for the quality of cut in plasma arc cutting (PAC) process, so the prediction of process performance is important to set the control parameters for achieving the adequate cu...
EXPERIMENTAL EVALUATION OF PERFORMANCE OF AIR-CONDITIONING COMPRESSOR DUE TO AL2O3 NANOPARTICLES IN LUBRICATING OIL
Nanoparticles are being widely used in recent years, due to their advantages. Addition of nanoparticles leads to significant change in thermal properties of a fluid. A new engineering medium, called nanofluid attracted a...
Influence of Segregation on the Rheological Behavior of Cement Grouts Determined by Coaxial Cylinder Rheometer
This work aims to study the phenomenon of segregation during the rheological characterization tests and influence of this phenomenon on the rheological behavior of cement grout. Thanks to a new methodology composing a sp...