Modeling and Analysis of a Cascaded Battery-Boost Multilevel Inverter Using Different Switching Angle Arrangement Techniques
Journal Title: Engineering, Technology & Applied Science Research - Year 2017, Vol 7, Issue 2
Abstract
Multilevel inverters have the capability to produce an AC staircase output waveform without using a bulky passive filter. Therefore, the multilevel inverters are gaining more and more popularity, among the different types of inverters, for photovoltaic applications in the modern era of technology. However, if the switching angle arrangement technique is not selected appropriately then the total harmonic distortion of the voltage output waveform may become undesirable. In this paper, Half-Equal-Phase, Feed-Forward and Selective Harmonics Elimination Pulse Width Modulation switching angle arrangement techniques at different power factors (i.e., 1.0, 0.75 and 0.50) are applied to a cascaded battery-boost inverter. PSIM software is used to evaluate and compare the performance of a 9-level cascaded battery-boost inverter with three switching angle arrangement techniques at power factors of 1.0, 0.75, and 0.50, respectively. Simulation results show that the Selective Harmonics Elimination Pulse Width Modulation technique can produce an output voltage and current waveform with the lowest total harmonic distortion. On the other hand, the output current waveform produced by power factor 0.50 had the lowest total harmonic distortion.
Authors and Affiliations
U. B. Tayab, M. A. Al Humayun
Keywords
Related Articles
- EP ID EP146125
- DOI -
- Views 242
- Downloads 0
Design of a Self-Phased Quadrifilar Helix Antenna for Satellite Communication
The objective of this study is the design and implementation of a Quadrifilar Helix Antenna (QHA) for telemetry, tracking and control of a Low Earth Orbit (LEO) satellite. Because of its cardioid-shaped circularly polari...
Constrained K-Means Classification
Classification-via-clustering (CvC) is a widely used method, using a clustering procedure to perform classification tasks. In this paper, a novel K-Means-based CvC algorithm is presented, analysed and evaluated. Two addi...
Geotechnical Properties of Rubber Tires and Sediments Mixtures
An experimental work was undertaken to study the effect of rubber tires on the geotechnical properties of a dredged sediment, using a mixing ratio of large size. For comparison, two types of soil were studied (dredged se...
An Efficient Adaptive Load Balancing Algorithm for Cloud Computing Under Bursty Workloads
Cloud computing is a recent, emerging technology in the IT industry. It is an evolution of previous models such as grid computing. It enables a wide range of users to access a large sharing pool of resources over the int...
Evaluation of Three Common Algorithms for Structure Active Control
Recently active structure controllers were considered to deal with the impact of earthquake forces and the result of the investigations provided multiple algorithms to calculate force control and many different ways to a...