MODELING AND KINEMATICS SIMULATION OF PLANE TEN-BAR MECHANISM OF WARP KNITTING MACHINE BASED ON SIMCAPE/MULTIBODY

Journal Title: Acta Mechanica Malaysia (AMM) - Year 2018, Vol 1, Issue 2

Abstract

A kinematics simulation model was established for the driven-latch needle of warp knitting machine, and the simulation was implemented by using SimMultibody. Thus, the simulation curves of displacement, velocity and acceleration for a certain key point of the mechanism were obtained. The modeling analysis is implemented for a certain mechanical system. The results show that this method is convenient, efficient and powerful. It provides a theoretical foundation and a better analytical approach of simulation for the design and analysis of complex multi-linkage mechanisms.

Authors and Affiliations

Zhonghua Yan

Keywords

Related Articles

POTENTIAL OF MUNICIPAL SOLID WASTE IN LIBYA FOR ENERGY UTILIZATION

Municipal Solid Waste (MSW) management is a chronic environmental problem in most of the developing countries, including the Libya. The concept of Waste-to Energy (WTE) is known as one of the several technologies capable...

A PCTRAN-BASED INVESTIGATION ON THE EFFECT OF INADVERTENT CONTROL ROD WITHDRAWAL ON THE THERMAL-HYDRAULIC PARAMETERS OF A VVER-1200 NUCLEAR POWER REACTOR

In this work, the effect of inadvertent control rod withdrawal on the thermal-hydraulic parameters of VVER-1200 type nuclear power reactor has been investigated. Personal Computer Transient Analyzer (PCTRAN) has been use...

CFD ANALYSIS ON DIFFERENT PISTON BOWL GEOMETRIES BY USING SPLIT INJECTION TECHNIQUES

A better spatial distribution is required for the injected fuel throughout the entire space of combustion geometry in DI diesel engine, to obtain a better combustion with lesser emission. In order to effectively make use...

EVALUATING THE IMPACT OF UNSTEADY VISCOUS FLOW AND PRESENCE OF SOLID PARTICLES ON PIPELINE SURFACES DURING CRUDE OIL TRANSPORT

Pipelines are commonly used in the petroleum industry to extract and transport crude oil and natural gas from the petroleum reservoir to storage facilities. The flow kinematics of crude oil through pipelines is unsteady...

AN EFFICIENT PSEUDO-POTENTIAL MULTIPHASE LATTICE BOLTZMANN SIMULATION MODEL FOR THREE-DIMENSIONAL MULTIPHASE FLOWS

In this paper, a single-component pseudo-potential model is analyzed by modifying corresponding equation of state. Simulation results show that with the modified vdW equation, this model is capable to simulate the multip...

Download PDF file
  • EP ID EP402900
  • DOI 10.26480/amm.02.2018.15.18
  • Views 126
  • Downloads 0

How To Cite

Zhonghua Yan (2018). MODELING AND KINEMATICS SIMULATION OF PLANE TEN-BAR MECHANISM OF WARP KNITTING MACHINE BASED ON SIMCAPE/MULTIBODY. Acta Mechanica Malaysia (AMM), 1(2), 15-18. https://europub.co.uk/articles/-A-402900