Modeling and Simulation of Photovoltaic Fed Drive by Using High Voltage Gain DC-DC Boost Converter
Journal Title: International Journal of Science Engineering and Advance Technology - Year 2015, Vol 3, Issue 9
Abstract
D.C. motors are seldom used in ordinary applications because all electric supply companies furnish alternating current. However, for special applications such as in steel mills, mines and electric trains, it is advantageous to convert low value of DC into high value of DC in order to use D.C. motors controlled by power electronic apparatus. Here the DC motor is controlled power electronic converters through RES system. The renewable energy sources such as PV modules, fuel cells or energy storage devices such as super capacitors or batteries deliver output voltage at the range of around 15 to 40 VDC. A boost converter is used to clamp the voltage stresses of all the switches in the interleaved converters, caused by the leakage inductances present in the practical coupled inductors, to a low voltage level. Overall performance of the renewable energy system is then affected by the efficiency of step-up DC/DC converters with closed loop control action, which are the key parts in the system power chain. This paper presents a dc-dc power converter integrated closed loop system to attain high stability factor in such a way to obtain, in a single stage conversion fed DC motor drive. This review is mainly focused on high efficiency step-up DC/DC converters with high voltage gain. The results are obtained through Matlab/Simulink software package.
Authors and Affiliations
Muralidhar A| M. Tech. Scholar, Department of Electrical and Electronics Engineering, Nova College of Engineering & Technology, JNTUK; West Godavari (Dt); A.P, India. muralidharannam@gmail.com, Peddakapu K| Assistant Professor Department of Electrical and Electronics Engineering, Nova College of Engineering & Technology, JNTUK; West Godavari (Dt); A.P, India. peddakapu45@gmail.com
Keywords
Related Articles
- EP ID EP16547
- DOI -
- Views 306
- Downloads 13
Hop-by-Hop Adaptive linking A Novel Approach for Finest routing
Using Hop-by-Hop Adaptive linking for achieving finest routing is an unprecedented approach. And it is the first link-state routing solution carrying traffic through packet-switched networks. At each node, for every o...
An Ontology- Based Multi-Document Summarization in Apocalypse Management
With the problem of extended information resources and the remarkable evaluate of data removal, the require of having automated summarization techniques revealed up. As summarization is needed the most at present searc...
Enhanced Protocol for data exchange through Natural Wireless Ad Hoc Networks
Conviction is based on the primary illustration contact between users. Our proposal is a absolute selfconfigured protected procedure that is capable to generate the network and distribute secure services without any i...
Effect Of Thermal Load On Valve By Using Conventional Diesel And Blended Fuels
The valves used in the IC engines are of three types: Poppet or mushroom valve or Sleeve valve or Rotary valve. Of these three types, Poppet valve is most commonly used. Since both the inlet and exhaust valves are su...
Detection and classification of brain tumor using Artificial Neural Network from EEG Images
Brain tumor is an abnormal intracranial growth caused by cells reproducing themselves in an uncontrolled manner. Curing cancer has been a major goal of medical researchers for decades. The early detection of cancer c...