MODELING CONTROLLED ASYNCHRONOUS ELECTRIC DRIVES WITH MATCHING REDUCERS AND TRANSFORMERS
Journal Title: Електротехніка і Електромеханіка - Year 2015, Vol 0, Issue 2
Abstract
Purpose. Working out of mathematical models of the speed-controlled induction electric drives ensuring joint consideration of transformers, motors and loadings, and also matching reducers and transformers, both in static, and in dynamic regimes for the analysis of their operating characteristics. Methodology. At mathematical modelling are considered functional, mass, dimensional and cost indexes of reducers and transformers that allows observing engineering and economic aspects of speed-controlled induction electric drives. The mathematical models used for examination of the transitive electromagnetic and electromechanical processes, are grounded on systems of nonlinear differential equations with nonlinear coefficients (parameters of equivalent circuits of motors), varying in each operating point, including owing to appearances of saturation of magnetic system and current displacement in a winding of a rotor of an induction motor. For the purpose of raise of level of adequacy of models a magnetic circuit iron, additional and mechanical losses are considered. Results. Modelling of the several speed-controlled induction electric drives, different by components, but working on a loading equal on character, magnitude and a demanded control range is executed. At use of characteristic families including mechanical, at various parameters of regulating on which performances of the load mechanism are superimposed, the adjusting characteristics representing dependences of a modification of electrical, energy and thermal magnitudes from an angular speed of motors are gained. Originality. The offered complex models of speed-controlled induction electric drives with matching reducers and transformers, give the chance to realize well-founded sampling of components of drives. They also can be used as the design models by working out of speed-controlled induction motors. Practical value. Operating characteristics of various speed-controlled induction electric drives are observed and depending on the chosen measure including measure of cost of losses of active energy, sampling of the best alternative of the drive is realized.
Authors and Affiliations
V. S. Petrushin, A. M. Yakimets, R. N. Jenoktajev
Keywords
Related Articles
- EP ID EP301190
- DOI 10.20998/2074-272X.2015.2.05
- Views 90
- Downloads 0
PLANAR SCHEMES TRACING IN THE SINGLE-LAYER CHANNEL
An algorithm for planar circuits tracing in a single layer channel, allowing more effective design solutions is proposed.
TO THE 100TH ANNIVERSARY OF THE NATIONAL ACADEMY OF SCIENCES OF UKRAINE – THE CRADLE OF DOMESTIC SCIENCE AND TECHNOLOGY
Purpose. Preparation of short scientifically-historical essay about creation and development of the National Academy of Sciences (NAS) of Ukraine. Methodology. Known scientific methods of collection, analysis and analyti...
MODELING OF OPERATION OF COAXIAL-LINEAR MOTORS WITH AXIAL AND RADIAL DIRECTIONS OF MAGNETIZATION OF PERMANENT MAGNETS IN DYNAMIC MODE
Theoretical and experimental investigations of the amplitude, phase and inertia-power frequency characteristics of two types of coaxial-linear electric motors of back-and-forth motion with permanent magnets, which magnet...
A CHOICE OF SECTIONS OF ELECTRIC WIRES AND CABLES IN CIRCUITS OF DEVICES OF HIGH-VOLTAGE HIGH-CURRENT IMPULSE TECHNIQUE
Purpose. Implementation of calculation choice of sections of electric wires and cables in circuits of devices of high-voltage high-current impulse technique (HHIT), characterized flowing of pulsed current ip(t) with diff...
ELECTROMECHANICAL TRANSIENT PROCESSES DURING SUPPLY VOLTAGE CHANGING IN THE SYSTEM OF POLYMER INSULATION COVERING OF THE CURRENT-CARRYING CORE OF ULTRA HIGH VOLTAGE CABLES
Aim. The article is devoted to the analysis of the electromechanical transient processes in a system of three frequency-controlled electric drives based on asynchronous motors that control current-carrying core motion, a...