Modeling, Design and Analysis of a Electrodynamic Levitation System by Considering the Skin Effect
Journal Title: روش های هوشمند در صنعت برق - Year 2015, Vol 6, Issue 24
Abstract
In this paper, lift and drag forces of permanent-magnet electrodynamic suspension (PMEDS) System have been studied by considering the skin effect. Electrodynamic suspension is based on repulsive force between two magnetic fields with the same polarity. In this research the electrodynamic suspension system consists of a moving permanent magnet block levitated over a flat conducting plate with 2 mm thickness. At first, the analytical model of the PMEDS is proposed. For this propose, permanent magnet poles are modeled by the current sheets. Then the eddy current is calculated on aluminum sheet by considering the skin effect. Finally, the lift and drag forces are calculated in difference speed. The 2D finite element method is utilized to investigate the effect of speed variations on the performance of PMEDS at two different airgap. Two-dimensional finite element model, the accuracy of proposed analytical model is validated. The results of the finite element method are compared with results obtained by analytical model. It shows the accuracy of the analytical model in the estimation of the lift and drag forces of an electrodynamic suspension system.
Authors and Affiliations
Mohammad Rajabi Sabadani, Abbas Najjar Khadabakhsh, Ahmad Darabi
Stability of nonlinear load electric arc furnaces in the presence of reactive power sources
This paper first discusses about Electric arc.the model used in this paper is a dynamic model shown with a differential equation. Then, this model is placed with power system model which is considered as a thevenin equiv...
Modeling, Design and Analysis of a Electrodynamic Levitation System by Considering the Skin Effect
In this paper, lift and drag forces of permanent-magnet electrodynamic suspension (PMEDS) System have been studied by considering the skin effect. Electrodynamic suspension is based on repulsive force between two magneti...
Design and Simulation of a Compact UWB MIMO Antenna with Mutual Coupling Reduction
In this paper, A compact multiple-input-multiple-output (MIMO) antenna with a small size of 26×31mm2 is proposed for portable ultrawideband (UWB) applications. The antenna consists of two square-monopole antenna with mic...
Adaptive Coordination of Fuse – Recloser in a Distribution System with High PV Penetration
Employment of photovoltaic (PV) distributed Generation in the distribution system, leads to improvement of network voltage profile and power quality. On the other hand, it cause miscoordination between fuses and recloser...
Short-Term Load Forecasting of Distribution Power System for Weekdays Using Old Data
Estimation of daily load in distribution companies which is performed to present the results to the DMS, is necessary. Daily load forecasting of power systems has traditionally been considered. Because load patterns are...