MODELING OF METHANE-AIR MIXTURE NONSTATIONARY COMBUSTION PROCESS IN COAL MINES
Journal Title: Вестник научного центра по безопасности работ в угольной промышленности - Year 2018, Vol 0, Issue 1
Abstract
Modeling of methane-air mixture nonstationary combustion process in coal mines is performed. Analytical dependencies are formulated to perform modeling of methane-air mixture nonstationary combustion on the basis of FlowVision software complex. The adequacy of the computer model on the experimental data, given in the literature for 7 experiments, as well as on its own experimental data was verified. The average relative error of the model is from 10 to 20 %. The developed model is scaled for pipes with large diameters from 2 to 4 m and can be used to calculate non-stationary combustion for coal mine conditions. Modeling of nonstationary combustion for coal mine conditions was carried out. As a result, for the considered configurations of the mines it is established that: the maximum velocity of the flame front during detonation reaches 1400 m/s; the maximum temperature in the calculated region during detonation is 2440 °C; the maximum overpressure at detonation is 4 MPa; the calculated values of the radiation flux density at detonation reach 2200 kW / m2.
Authors and Affiliations
S. A. Lisakov, Ye. V. Sypin, Yu. A. Galenko, A. N. Pavlov
Keywords
Related Articles
- EP ID EP645801
- DOI -
- Views 88
- Downloads 0
THEORY OF SYNERGETIC INTERACTION OF ELEMENTS IN SAFETY SYSTEMS OF HAZARDOUS PRODUCTION FACILITIES IN THE CONTEXT OF MULTIFUNCTIONAL SAFETY SYSTEMS OF COAL MINES AND MULTIFUNCTIONAL LIFE SUPPORT SYSTEMS IN CASE OF ACCIDENTS
The article reveals the basics of the theory of synergism of safety systems, the basic principles of interaction between mine safety systems and life support systems (paramilitary mine rescue units) , the basic terminolo...
MATHEMATICAL MODELING OF THE ANGLE EFFECT OF THE APPLICATION SHOCK LOAD WHILE DRILLING ROCK ON THE EFFICIENCY OF CHIPPING FORMATION
The article substantiates the possibility of improving the efficiency of short-hole drilling by determining the most effective angle of application of the shock load during impact-rotation drilling. Investigated the stre...
COAL INDUSTRY ECOLOGY: THE STATE, PROBLEMS, WAYS OF SOLUTION
The coal industry data on the amounts of normatively cleaned and polluted sewage water discharged and on the structure and efficiency of the treatment facilities, on the amount of pollutants captured by technical means a...
ASSESSMENT OF STRESSES ON GAS CONTENT OF THE MARGINAL PART OF A COAL SEAM
Description of the developed method and the coal seam gas kinetic characteristics measurement results received by gas pressure and temperature controlling in asks with drilled coal samples are presented. High convergenc...
PRACTICE OF USING "PKP" TYPE DEVICES FOR DETERMINING THE QUALITY OF ROCK DUSTING IN COAL MINES
For more than 15 years, coal-based enterprises have used PKP devices. During this time, almost one and a half thousand instruments of this type were released and an enormous experience of operating these devices was accu...