Modeling of Real Loading Diagrams of Wind Pressure on Cylindrical Tank using SCAD Software
Journal Title: Металлические конструкции - Year 2016, Vol 22, Issue 4
Abstract
The loading diagram of wind pressure on cylindrical wall of the tank has a difficult form that change in a plan and in height. Account of this type of load in analytical calculations is extremely difficult, in calculating with finite element method using software packages possibility of setting the wind load is determined by the functionality of the program. In this regard, both in domestic and European normative documents is offered method of setting a simplified loading diagram of wind pressure. However, when designing high degree of responsibility buildings, such as reservoirs, there is a necessity to account the real form of wind pressure. In real terms designer may be limited in the choice of the settlement program, in this article discusses the methodology of setting the real loading diagram of wind pressure on cylindrical wall of steel tank using SCAD software.
Authors and Affiliations
Maxim Tcepliaev
Keywords
Related Articles
- EP ID EP448615
- DOI -
- Views 121
- Downloads 0
Comparative Analysis of the Efficiency of Structural Solutions of Large-Span Coverage on the Curvilinear Plane
The article presents an analysis of the influence of various design solutions on the spatial work of long-span coverage. The results of numerical studies of the rational constructive solution both on the basis of efforts...
The Method of Engineering Calculations of the Oscillations of the Structure of Rigid Conductors with the Application of New Modes of Damping
The problem of reducing the level of vibrations of rigid busbar structures in many cases is associated with the need to increase rigidity and reduce the material consumption of structures, however, it is important to ful...
A Determination of the Residual Life of Steel Bin of Coke-Screening Station Taking into Account Operating Corrosive Damages
The article presents the results of analysis of the tensely-deformed state of a steel bunker for storage of coke. The calculation is performed according to engineering procedure and using software complex LIRA-SAPR 2013....
Explosions in the Steel Industry and Their Consequences on the Building Structures of Industrial Buildings
Hazards have been identified; the risk of accidents from explosions during electric steelmaking metal production has been evaluated. A detailed analysis of the causes of the explosion in the electric furnace, the consequ...
The Analysis of the Stress-Strain State of the Optimal Corner Dead-end Support of Overhead Power Transmission Line 110 kV
The analysis of the stress-strain state of dead-end OPTL support which is considered as spatial repeatedly statically indefinable through system with rigid joints is performed. The technique and results of calculation of...