Modeling, Simulation And Implementation Of Adaptive Optical System For Laser Jitter Correction
Journal Title: International Journal of Modern Engineering Research (IJMER) - Year 2014, Vol 4, Issue 2
Abstract
Adaptive Optical System (AOS) for correction of beam jitter in a high power laser source is described. The jitter in a high power laser may results from platform vibrations and dynamically varying in-homogeneities in the lasing medium. The effect of beam jitter on the performance of high power laser in directed energy weapon (DEW) system is discussed. Simulation studies have been carried out to optimize parameters of jitter correction system. An experimental arrangement to stabilize a high power laser beam is described and results are presented.
Authors and Affiliations
Anjesh Kumar
Keywords
Related Articles
- EP ID EP104746
- DOI -
- Views 122
- Downloads 0
Single-Input Double Output High Efficient Boost Dc–Dc Converter
The aim of this project is to develop a high-efficiency single-input multiple-output (SIMO) dc– dc converter. The proposed converter can boost the voltage of a low-voltage input power source to a controllable hi...
Modified Chattering Free Sliding Mode Control of DC Motor
Abstract: This paper is concerned with the design of a Modified Sliding Mode Controller for the position control of DC Motor. The DC motor can be modeled as a linear time invariant single input single output (SISO)...
Enhance the Productivity of the Solar Still by Improving the Operational Parameters
The productivity of the still is mainly depends upon various operational parameters. In this project a cooling wick is fixed at the top of the glass, and the cooling water is allowed to flow continuously, throu...
Design of Cooling Package of Diesel Genset
Traditional cooling systems have relied on a mechanical coolant pump and an engine mounted radiator fan driven off the engine’s crankshaft. The compactness of the system often turned out to be a problem when the generato...
Analysis of Temperature loss of Hot Metal during Hot Rolling Process at Steel Plant
Hot metal is travelling a long distance (around 126 m) between roughing mill and a Steckel finishing mill during hot rolling process in a steel plant which resulted in heat loss. Since, the metallurgical qualiti...