Modelling and Simulation of Three Phases to Seven Phases Transformer Connection
Journal Title: International Journal for Research in Applied Science and Engineering Technology (IJRASET) - Year 2016, Vol 4, Issue 3
Abstract
The main aim in this paper to build a three to seven phase AC multiphase transformers to converted into DC power through modelling and simulation. A new technique of pure seven-phase Sine-wave of fixed current/voltage and frequency is obtained now we have also used for R-L load and motor testing purposes. Here complete modelling has been simulated by using MATLAB Software. Multi-winding transformer block was taken from the sim-power system block library and turn ratios set in the dialog box then simulated. The whole modelling/design and simulation of the proposed work is presented in this paper. Seven phase transmission line system can be developed for the generation of bulk power transfer. As per need of the induction motor under a loaded condition is used for the viability of transformation system. In seven phase’s, each phases shifted from the order by 51.42° (360°/7) and got the Sine-wave current/voltage. The novel scheme connection was expanded by using the modelling and simulation approach to prove the viability of the implementation and this type of transformer is required in aerospace engineering, railway engineering and automobile engineering applications.
Authors and Affiliations
Satish Karekar
Keywords
Related Articles
- EP ID EP21714
- DOI -
- Views 245
- Downloads 5
A Review Report On Productivity Improvement in Pumping Unit Manufacturing Line by Using Value Stream Mapping
Value Stream Mapping is a lean tool that employs a flow diagram documenting in high detail every step of a process. Value stream mapping is used as the fundamental tool to identify waste, reduce process cycle times and...
An Introduction to Optical Character Recognition
This article is all about the development of OCR usingMATLAB. It describes all from segmentation toclassification. To understand how an experimental approach was chosen, for example, the result got affected by the use o...
slugAn Energy Saving Adaptive Clustering for Wsn
Routing in Wireless Sensor Networks is different from routing in AD-HOC networks as nodes are randomly deployed. There are three types of routing in the WSNs: Flat, Hierarchical and Location Based Routing. The paper di...
Optimum Modulation Index Selection in Multilevel Inverter Using Selective Harmonic Elimination
In this project, a multilevel inverter was designed and implemented to operate a stand-alone solar photovoltaic system. The proposed system uses selective harmonics elimination pulse-width modulation (PWM) in the multil...
Embeeded Automatic Vehicle Control System Using Voice Recognition On ARM 7 Processor
This paper gives the design and implementation of embedded system for voice recognition in automatic vehicle driving using ARM cortex A7 for physically challenged people. ARM cortex A7 has features such as low power con...