MODELLING OF CHANGES IN SURFACE TOPOGRAPHY IN DRY SLIDING CONDITIONS
Journal Title: Tribologia - Year 2016, Vol 267, Issue 3
Abstract
Metrology of surface topography is presently so developed that, in some ways, we can predict the surface behaviour of the one part in co-operation with another element. We can single out two main approaches to the modelling of surface texture. In the first one, the modelling does not take into account the conditions of the technological or operational formation of the surface, while in the second, more complicated approach, modelling takes into account the real conditions of forming the surface. In this work, tribological tests were carried out in dry sliding conditions, and the analytical methodology of wear or worn surface. Approximations obtained using the second approach are usually worse than those using the first method [L. 8–10]. In the presented work, tribological tests in dry sliding conditions were carried out, and a numerical model to determine the cross-sectional area of wear in presented conditions was produced, and the results obtained using modelling and experimental tests were compared.<br/><br/>
Authors and Affiliations
Andrzej DZIERWA, Rafał REIZER
METODA OCENY TRWAŁOŚCI POWŁOK MALARSKICH PODDANYCH ODDZIAŁYWANIU MASY MINERALNEJ
W pracy omówiono problemy dotyczące usterek pasywnych powłok malarskich. Zidentyfikowano 4 przyczyny ich powstawania: konstrukcyjne, technologiczne, eksploatacyjne i zużyciowe. Omówiono znormalizowane metody oceny jakośc...
CAPACITIVE METHOD OF ELASTOHYDRODYNAMIC FILM THICKNESS MEASUREMENT
An analysis of a film thickness measurement method with thin layer transducer in an EHD contact was carried out. The construction of a sensor, a circuit model, the principle of measurement, a measurement scheme and calib...
Właściwości przeciwzużyciowe amorficznych warstw a-Si:C:H stosowanych w ogniwach fotowoltaicznych
Amorficzne uwodornione warstwy na bazie krzemu i węgla a-Si:C:H pełnią rolę warstw antyrefleksyjnych w ogniwach fotowoltaicznych. Warstwy o grubości rzędu 100 nm zostały osadzone niskotemperaturową techniką PECVD na podł...
Właściwości tribologiczne kompozytów metalopolimerowych w warunkach tarcia technicznie suchego
WEAR RESISTANCE CHARACTERISTICS OF THERMO-CHEMICALLY TREATED STRUCTURAL STEELS
The article presents results of investigations of wear resistance by friction, employing the “3 cylinder – cone” method, of selected structural steels subjected to given thermo-chemical treatment, i.e. nitriding, carburi...