Modelling of critical power from road data
Journal Title: Journal of Science and Cycling - Year 2014, Vol 3, Issue 2
Abstract
Background: Performance tests are an integral part of evaluating competitive cyclists. Despite all technological and physiological advances, limited research has been performed addressing the translation of standardized, relevant laboratory tests into the field and consequently into “real world” cycling (i.e. .(i.e. González-Haro et al., 2007: British Journal of Sports Medicine, 41(3), 174–179; Quod et al., 2010:InterInternational Journal of Sports Medicine, 31(6), 397–401; Nimmerichter et al., 2010: International Journal of Sports Medicine, 31(3), 160- 166). For continuous activities between approximately 2 and 30 minutes, the assessment of Critical Power (CP) is one such relevant test. Compromising ecological validity, to date CP testing is mostly constrained to the laboratory. Purpose: To investigate a novel CP road testing protocol. Methods: Laboratory determined CP values using a 30 min intra-trial recovery period (Bishop & Jenkins, 1995: European Journal of Applied Physiology and Occupational Physiology, 72 (1-2), 115-120) were compared with those determined in the field, i.e. on the road. The experiment comprised of planned maximal efforts of 12 min, 7 min and 3 min with a 30 min recovery period between efforts. Linear regression was used to determine CP using the work-time equation (W = CPt + W). Results: There was no significant difference between laboratory and road CP values. The mean difference between the two environments was 0 ± 5.5 W. The standard error of estimates was 1.7% and limits of agreement were -10.8 – 10.8 W (Fig. 1). Discussion: Results suggests that CP can be tested on the road. Gonzales-Haro accepted their incremental velodrome field test as being valid with reported limits of agreement of 130 W to – 24 W and a random error of 13.9%. Our limits of agreement values are considerably higher and standard error of estimate values are considerably lower than those reported by Gonzales-Haro. The experimental protocol provides a practical and easy to use alternative to the conventional testing protocol for coaches and athletes when determining CP in on the road. Conclusion: The aforementioned research provides support for the acceptance of road CP performance testing using a 30 min inter-maximal effort recovery period.
Authors and Affiliations
B Karsten| Centre for Sports Science and Human Performances, University of Greenwich, Chatham Maritime, United Kingdom, S Jobson| Department of Sport Studies, University of Winchester, Winchester, United Kingdom, J Hopker| School for Sport and Exercise Sciences, University of Kent, Chatham Maritime, United Kingdom, L Stevens| Centre for Sports Science and Human Performances, University of Greenwich, Chatham Maritime, United Kingdom, C Beedie| Department of Sport and Exercise Science, ABER, Aberystwyth, United Kingdom
Keywords
Related Articles
- EP ID EP2852
- DOI -
- Views 389
- Downloads 26
Comparing time-trial and time to exhaustion performance
Introduction: Time to exhaustion trials (TTE) at a fixed exercise intensity have been widely used in a laboratory setting to measure endurance performance. However, they have been criticised for lacking ecological validi...
Power output and affective load change during time trial according to environmental conditions
Introduction: During cycling events, riders have to face to different environmental conditions like wind or road gradient, which leads to variable resistive forces. Those resistances involve a specific pedaling cadence (...
Preliminary study: the effect of biomechanical foot orthotics in bilateral pedalling asymmetry in three cyclists affected by an anatomic asymmetry
The optimization of the cyclist's position aims to increase performance and may prevent injuries. To find the optimum posture, taking into account anthropometry of the cyclist is essential [1] because an anatomic asymmet...
Analysis of performances at the ‘Ironman Hawaii triathlon’ and its qualifier events with respect to nationality
Ergometers and stationary bicycle trainers are commonly used in laboratories to simulate overground riding. Missing from such instrumentation, however, is any demand for balance and the fraction of the metabolic cost ass...
Physiological characteristics of elite vs non-elite enduro mountain bike cyclists
Enduro mountain bike racing debuted internationally in 2013 as the Enduro World Series (EWS). Riders compete individually on multiple timed predominantly downhill stages and travel generally uphill between stages eithe...