Modelling of Nonlinear Dynamic of Mechanic Systems with the Force Tribological Interaction
Journal Title: Tribology in Industry - Year 2015, Vol 37, Issue 3
Abstract
This paper considers the mechanisms with different structure: tribometric device and a mechanism for handling of optical glasses. In the first device, the movement of the upper platform is due to a reciprocating friction interaction. In the second device, the processing of the optical element or group of elements occurs due to the rotational motion. Modelling of the dynamic of these systems with Matlab/Simmechanic allowed carrying out the analysis of dynamic of mechanisms, considering nonlinearity tribological interactions for these systems. The article shows that using of the computer models can effectively carry out the selection of the control parameters to create the desired mode of operation, as well as to investigate the behaviour of systems with nonlinear parameters and processes of self-oscillations. The organization of the managed self-oscillation process is realized to create the relevant high-performance manufacturing, for example, for the processing of optical glasses.
Authors and Affiliations
K. A. Nuzhdin , V. M. Musalimov , I. I. Kalapyshina
Keywords
Related Articles
- EP ID EP148477
- DOI -
- Views 83
- Downloads 0
Wear Evaluation on Turning Inserts Superficially Modified with Titanium Nitride by HIPIMS
The research aim evaluates the wear resistance of inserts for turning of tungsten carbide (WC), uncoated and coated with titanium nitride through physical vapor deposition (PVD) process by high-power impulse magnetron sp...
Epoxy Resin Based Composites, Mechanical and Tribological Properties: A Review
High fuel consumption by automobile and aerospace vehicles built from legacy alloys has been a great challenge to global design and material engineers. This has called for researches into material development for the pro...
Some Aspects Concerning the Behaviour of Friction Materials at Low and Very Low Sliding Speeds
The tribological aspects concerning the behaviour of friction materials in the range of low and very low sliding speeds (0.2 – 200 mm/min) are essentially different of those in the high sliding speeds range. This paper a...
Wet Friction-Elements Boundary Friction Mechanism and Friction Coefficient Prediction
The friction mechanism for the boundary friction course of friction elements engagement was explicitly expressed. The boundary friction model was built up by the surface topography. The model contained the effect of boun...
Static Performance of Surface Textured Magnetorheological Fluid Journal Bearings
Previous studies of journal bearings with artificial texturing on the bearing surface show potential benefits in certain cases. These benefits are usually focused on a specific operating area of the bearing, whereas unde...