MODELLING OF TRANSMITTER OF SOQPSK-TG SIGNALS
Journal Title: Вісник Національного університету "Львівська політехніка", серія "Радіоелектроніка та телекомунікації" - Year 2013, Vol 766, Issue 2013
Abstract
This paper is devoted to the practical side of the SOQPSK transmitter realization. It describes detailed model of one of possible variants of transmitter realization. The model is made in such a way that any part of it can be easily changed or any parameter can be tuned to achieve best efficiency of the system. The biggest problem to be solved when realizing transmitter is practical realization of ternary encoder. This paper also presents our solution of this problem using elemental discrete blocks that could be easily realized in practice either using discrete elements or included as part of system realized on FPGA. The paper itself is divided on four sections: 1. Introduction. This part contains the information about the development of telemetry systems, standard types of modulations and references links to the papers devoted to the problems of telemetry signals. 2. SOQPSK modulation and its kinds. This section contains theoretical statements and formulas of the SOQPSK type modulation. Also different parameters that define types of SOPQSK modulation (SOQPSK-A, SOQPSK-B, SOQPSK-TG) are presented. 3. Transmitter model. In this section the problem of telemetry SOQPSK-TG transmitter modeling is described. Next the step by step explanation of the model, its blocks and their operation is shown. Explanation is organized in the way how the input signal propagates from input to output. Also the problem of transmitter filter is described. Two possible solutions of this issue are shown in this section too. 4. Conclusions. Some short conclusions to this paper are given in this section. In general we can say that the necessity of new telemetry systems creation force the search for new, more effective modulations. Created standards describe some of the signals types and their parameters. But these stands do not fully describe methods of these signals generation. Within the work on creation of detailed model of SOQPSK transmitter the scheme of binary sequences of {-1, +1} alphabet to ternary sequences of {-1, 0, +1} alphabet was created. The created model allows to investigate the influence of its separate blocks’ parameters change on the whole system, but also easily make these changes. Also, it is necessary to point out that such model detail allows to make relatively easy practical realization just by transferring it to FPGA, which in now a days have big enough library of standard blocks and systems.
Authors and Affiliations
Roman Yankevych, S. Martyugov, P. Tokarchuk, Myron Miskiv, A. Ogorodnyk
Keywords
Related Articles
- EP ID EP461006
- DOI -
- Views 143
- Downloads 0
ANALOGUE PLL AS CIRCUIT BASIS OF FM RADIO RECEIVERS
Demodulators of broadband frequency modulated (FM) signals are characterized by noise immunity threshold – the phenomenon of rapid deterioration of signal-to-noise ratio on its output with the slight deterioration of thi...
LINEARY MAX-PLUS MODELS APPLYNG IN TRAFFIC MANAGEMENT TASKS
Development of next generation networks concept let to reconfigure the most of existing traffic controls at telecommunication node. Necessity of its modification causes of low efficient network resources usage. Among of...
SMALL STRAIN MONITORING BY MEANS OF ANALYSIS OF SPEKLE PATTARN AT THE OUTPUT OF MULTIMODE POLYMER FIBER
In this paper an optical scheme and the operation principle of strain monitoring based on the interference between guided modes in multimode polymer optical fiber is investigated. The possibility of measuring of the rela...
RESEARCHES OF EFFICIENCY OF SUBCHANNELS OF WIRELESS NETWORKS BASED ON LTE / LTE-ADVANCED TECHNOLOGIES IN CASE OF USE OF DIFFERENT KINDS OF SIGNAL MODULATION
It carried out the theoretical researches of bit error probability and efficiency of subchannels of wireless networks based on LTE / LTE-Advanced technologies in case of use of quadrature phase manipulation (QPSK), М-ary...
Flicker-noise spectroscopy method
Method of determining the processes that take place inside the investigated system is presented here. Method is based on the analysis of energy spectrum of investigated system own noises. Using energy spectrum of own noi...