MODERN METHODS OF DIESEL ENGINE OPERATION PROCESSES MATHEMATICAL MODELLING
Journal Title: Вестник Харьковского национального автомобильно-дорожного университета - Year 2016, Vol 75, Issue
Abstract
Modern methods of mathematical modelling of operation processes of a diesel engine are considered, the review of mathematical models used for modelling is carried out. Analysis of possibilities of modern program complexes for modelling the operation processes occurring in diesel engines is resulted.
Authors and Affiliations
А. Babich, S. Gromov
Keywords
Related Articles
- EP ID EP238845
- DOI -
- Views 85
- Downloads 0
APPLICATION OF A COMBINATION METHOD OF VEHICLE CONTROL FOR THE IMPLEMENTATION OF VEHICLE CRIP MOTION
A method of vehicle straight angle motion relative its axial axis by turning the front wheels and simultaneous braking of the external side wheels is offered. An equation describing the condition of four-wheel drive vehi...
ЭКОЛОГИЧЕСКИЕ АСПЕКТЫ ФОРМИРОВАНИЯ МНОГОКОМПОНЕНТНЫХ ПОКРЫТИЙ СПЛАВАМИ КОБАЛЬТА
Предложена экологически безопасная ресурсосберегающая технология полифункциональных покрытий сплавами кобальта с тугоплавкими металлами. Представлены результаты исследования каталитичниx и физико-механических свойств гал...
THE INFLUENCE OF THE COMBINED DEFORMATION AND PRERECRYSTALLIZATION HEAT TREATMENT ON THE SUBSTRUCTURE AND HARDNESS OF STEELS 40X AND 12X13
Problem. Increasing the physical and mechanical properties of materials by nanostructurization is the main problem of modern material science. Combination of previous deformation by 70 % and the fol-lowing pre-recrystall...
ПРИСТРІЙ ДЛЯ ПРЕФОРМАЦІЇ АРМУЮЧОГО ЕЛЕМЕНТА КОЛІС САМОХІДНИХ КРАНІВ
Запропоновано малогабаритну та металоємну конструкцію преформуючого пристрою на опорах кочення елементів металокорду. Обґрунтовано раціональні параметри настроювання технологічного пристрою. Здійснено оцінку ефективнос...
THE DETERMINATION OF REAR WALL STRESSES OF THE SCRAPER BOWL
The article is devoted to investigating the design concepts of the rear walls of the scraper. The research has been performed in CAD Solid Works Simulation of the stress state of the rear wall and using polarization-opti...