Modification of Pb-Sb eutectic bearing-solder alloys with bismuth additions rapidly solidified from melt
Journal Title: JOURNAL OF ADVANCES IN PHYSICS - Year 0, Vol 10, Issue 1
Abstract
In this work, various amounts of Bi element have been added to the eutectic Pb-Sb to form bearing- solder materials. The Pb-Sb eutectic has been produced by rapid solidification using melt spinning technique with various amounts of Bi have been added to it, in the ratio 1, 2 , 3, 4, and 5 wt.%. Scanning electron microscopy (SEM), X- ray diffraction (XRD) analysis and differential scanning calorimetry (DSC) have been carried out. Microhardness measurements were also carried out using Vicker’s hardness technique. The results showed that, the ternary alloys up to 4 wt.% Bi have properties superior to binary eutectic material. Bismuth up to 4wt. % increases the Young’s modulus, Vicker’s hardness and decreases the electrical resistivity, internal friction and melting point. The ternary Pb-13.1Sb-4Bi solder alloy has a lower melting point about 237.87 ?C. Also, the results show that formation of Bi phase developed the mechanical properties and Vicker’s hardness due to addition of Bi element. The addition of Bi refines the crystal size of Sn in case of melt spun alloys as seen in scanning electron micrographs and X-ray diffraction.
Authors and Affiliations
Rizk El- Sayed, Bilal W. Mahdi, Abu-Bakr El-Bediwi, Mustafa Kamal
Keywords
Related Articles
- EP ID EP653713
- DOI 10.24297/jap.v10i1.1346
- Views 71
- Downloads 0
Preparation and Characterization of Polyacrylamide – Silver Nanocomposite
The preparation of polyacrylamide (PAAM)/silver (Ag) nanocomposites, transmission electron microscopy (TEM), X-ray powder diffraction (XRD), and vibrational structure were studied in this work. TEM results showed that th...
THE PHYSICAL MODEL FOR AN ORGANIZATION: SIMILAR ASPECTS BETWEEN "ATOM'' AND "ORGANIZATION''
In this paper we claim that there exist some similar aspects between "atom'', as a typical physical system, and its counterpart "organization'' as a social system. These similar aspects have been shown by comparison betw...
Dielectric and Electrical Properties of LaGaO3 Ceramics
LaGaO3 based perovskite oxides doped with Sr and Mg exhibit high ionic conductivity over a wide range of oxygen partial pressure and found to be very stable in reducing, oxidizing, and CO2 atmospheres. In this study...
Effect of Annealing on Creep Behavior, Hardness, Roughness and Electrochemical Corrosion Parameters of Co- Cr Based Alloy
In the present work, the effect of annealing on creep behavior, hardness, maximum shear stress, roughness and electrochemical corrosion parameters of commercial Co64Cr29Mo6.5A0.5 (A= C, Si, Fe, and Mn) dental alloy from...
Yang-Mills Families
The Yang-Mills theory structure is based on group theory. It rules the symmetry relationship where the number of potential fields transforming under a same group must be equal to the number of group generators. It define...