Modified NEH Algorithm for Multi-Objective Sequencing in Mixed-Model Assembly Lines
Journal Title: Mehran University Research Journal of Engineering and Technology - Year 2018, Vol 37, Issue 3
Abstract
Assembly lines are usually used for the mass production. The dawn of mass customization has forced the industries to shift to MMAL (Mixed-Model Assembly Lines). ALBP (Assembly Line Balancing Problem) and MSP (Model Sequencing Problem) are two major problems in MMAL. Sequencing of models is an important aspect of MMAL because improper sequencing can lead to the production loses. This paper dealt with the MSP in MMAL. A modified INEH (Intelligent Nawaz, Enscore, and Ham) algorithm was developed to solve multi-objective MSP. For this purpose, a MCDM (Multi-Criteria Decision Making) techniquewas integrated with NEH. A mathematical model was presented for three performance measures; Idle time, Make-span and Flow Time. A case study of pumps assembly line was conducted. Proposed INEH simultaneously optimized all performance measures (Flow Time= 123.47min, Make-Span= 156.95min and Idle Time=1.67 min) while the traditional NEH variants only optimized single performance measure and ignoring the others. Performance of the proposed algorithm was compared with traditional NEH algorithm and its variants using TOPSIS (Technique for Order Preference by Similarity to Ideal Solution), a MCDM technique. Results showed that proposed INEH outperformed rest of the NEH algorithms as TOPSIS ranked INEH first with the relative closeness of 97.3% while the NEH variant for flow time is worse algorithm with the relative closeness of 2.8%.
Authors and Affiliations
M. Rauf, M. H. Aziz
Keywords
Related Articles
- EP ID EP304682
- DOI 10.22581/muet1982.1803.09
- Views 115
- Downloads 0
Optimizing Electricity Load and Cost for Demand Side Management in Smart Grid
This paper proposes a mechanism for OELC (Optimizing Electricity Load and Cost) for smart grid. The load of every smart home is predicted one-hour prior to their actual usage. To fulfill PL (Predicted Load) of each consu...
Effect of Cryogenic Treatment on Mechanical Properties of AISI 4340 and AISI 4140 Steel
From last epoch till to date, AISI 4340 and AISI 4140 have been widely used in different engineering applications. These applications include bolt, screws, gears, drive shafts, crane shaft and piston rods for engines due...
Factors Causing Health and Safety Hazards in Construction Projects in Pakistan
In spite of technical advancements, construction industry in developing countries, including Pakistan, heavily relies upon manual labor and orthodox methods of construction. Such practices then give rise to safety issues...
Design and Analysis of Hybrid Tree Multipliers for Reduction of Partial Products
This paper confers one of the three phases of tree multipliers, i.e. the Partial Product reduction phase. In this paper four types of hybrid tree multipliers are studied and proposed using parallel counters (full adders...
Effects of Process Parameters on Ozone Washing for Denim using 33 Factorial Design
Denim garment is getting popular day by day. It is highly demandable because of its versatility, comfort and durability. Different techniques of denim washing increase this demand drastically. Denim washing is the proces...