Molybdates and tungstates sorption on organo-smectites as a process controlled by the type and amount of surfactant
Journal Title: Geology, Geophysics & Environment - Year 2016, Vol 42, Issue 1
Abstract
Modification of a smectite with organic surfactants leads to the formation of an organo-mineral complex characterized by a positive charged (Bajda et al, 2015). The process involves the exchange of naturally occurring cations, eg. Ca2+, Mg2+, Na+, K+ by large organic cations of surfactants. This alteration makes it possible to use organo-smectites as sorbents to remove anionic forms of Mo(VI) and W(VI) from aqueous solutions. The concentration of molybdenum in the environment is significantly enhanced by anthropogenic inputs from coal-resource development, fly ash, sewage sludge and hard-rock mining activity (Kalembkiewicz, Sočo, 2009). W(VI) is released to the environment through its use in winter tires or by its applications in industry e.g. enriches alloys or electrotechnics (Gustafsson, 2003). The environmental behavior of molybdenum and tungsten once they dissolve becomes very complex as Mo(VI) and W(VI) anions occur as a monomer only in alkaline or neutral solutions. Bentonite from the Jelšovy Potok in Slovakia, rich in montmorillonite phase, was used in the sorption experiments (Bajda et al. 2015). Through the preparation of a series of experiments it was possible to define the impact of various surfactants, their amount and organo-smectites’ properties order on the sorption capacity and pH effect. Smectite has been modified with dodecyltrimethylammonium bromide (DDTMA), didodecyldimethylammonium bromide (DDDDMA), hexadecyltrimethylammonium bromide (HDTMA) and dihexadecyldimethylammonium bromide (DHDDMA) in amounts of: 0.5, 1.0 and 2.0 of cation exchange capacity (CEC). Experiments of Mo(VI) and W(VI) sorption on organo-smectites were conducted under various concentrations of Mo(VI) and W(VI) (0 – 20 mM) and in wide range of pH’s (1-13). The effectiveness of modifications follows the order DDTMA-smectite-> HDTMA-smectite> DDDDMA-smectite > DHDDMA-smectite. The unmodified smectite did not remove Mo(VI) and W(VI) aninos from the aqueous solution at all. In the removal of Mo(VI), sorption efficiency follows the order: DDTMA-smectite > DDDDMA-smectite > HDTMA-smectite> DHDDMA-smectite. In case of W(VI) the efficiency of the removal can be place: DDDDMA-smectite> DDTMA-smectite> HDTMA-smectite> DHDDMA-smectite. With an increasing concentration of Mo(VI) or W(VI) in the solutions, the sorption increases. The maximum sorption capacity in the removal of Mo(VI) was 1710 mmol Mo(VI)/kg in case of smectite modified with DDTMA at 0.5 CEC. The best result of tungsten sorption was 5882 mmol W(VI)/kg and it was obtained for DDDDMA-smectite (0.5 CEC). Results showed that the sorption is more effective at a lower pH, in both Mo(VI) and W(VI) removal. The smectite modified with surfactant with double carbon chain (DDDDMA, DHDDMA) proved to be a better sorbent. With an increasing amount of surfactant attached to the smectite, the sorption efficiency increases.
Authors and Affiliations
B. Muir, D. Andrunik, T. Bajda
Keywords
Related Articles
- EP ID EP204510
- DOI 10.7494/geol.2016.42.1.102
- Views 56
- Downloads 0
Centre of Sustainable Development and Energy Saving ‘Miekinia’
Centre of Sustainable Development and Energy Saving ‘Miekinia’
Uncertainties in microseismic event location analysis
Microseismic monitoring is the observation technique of small earthquakes, called microseismic events, which occur in the ground as a result of human activities or industrial processes such as hydraulic fracturing. Hydra...
Analysis of the trace fossils from Paleogene formations of the Central Western Carpathian (Orava region)
Up to now only little attention was dedicated to the study of the trace fossils in the development of the Central Carpathian Paleogene Basin in the Orava region. Occasional trace fossils findings from the Central Carpath...
Determination of reservoir properties through the use of computed X-ray microtomography – eolian sandstone examples
The possibility of examining rock pore structure by the means of computed X-ray microtomography was presented. Parameters characterizing the pore structure, such as: porosity and coefficient of homogeneity of pore struct...
Black "marble" in the Polish architecture - characteristics and possibility of its provenance determination: the case of the Dębnik limestone
Black limestone, also known as black "marble", was widely used in the Polish small-scale architecture and art of the 17th and 18th centuries. Besides the Devonian limestone from Dębnik near Krakow, also popular were the...