Multifunctional Nanocomposites in B4C-Tic-Tib2-Sic-BN-Al2O3-Sialon-C Carbon Fiber System for Armor Fillets, Turbine Discs and Wings, High-Temperature Wear Resistant Nodes

Abstract

Goal - to receive on first stage β - SIALON containing nanocomposites by reactive sintering method at 14000C, with nitrogen pro-cess from origin composition in TiC-BN-SiC-B4C-Si-Al-Al2O3 (nanopowder) system. By using this method of synthesis, it became possible to receive nanocomposites with different percentages of β - SIALON. Our task was to study the phase composition of re-ceived consolidated materials in the TiC-TiB2-BN-SiC-B4C-β-SiAlON-Al2O3 (nanopowder-400nm.) system. Method. The obtained mass was grounded in an attritor and the consolidated composite was obtained by hot pressing at 16200C during 40 minutes, with glass perlite (Armenia) dope 2 mass%, delaying at final temperature for 8 min, under 30 MPa pressure and vacuum – 10-3 Pa. Perlite from Aragatc contained 96 mas. % glass. To study the phase composition of the composites, we conducted an X-ray structural analysis on the DRON-3 device. And to study the microstructure, we conducted research on an optical microscope -AC100 and a raster electron microscope “Nanolab 7” of the company "OPTON”. The values of the electrical parameters of the studied composites were calculated on the basis of the ob-tained "lgp- t" dependence. We have studied mechanical properties. Result. In TiC-TiB2-BN-SiC-B4C- β-SiAlON-Al2O3 – C Carbon Fiber system we obtained nanocomposites with high mechanical proper-ties. The advantage of this method is that compounds, which are newly formed thanks to interaction going on at thermal treat-ment: Si3N4, Si, AlN are active, which contributes to β-SiALON formation at relatively low temperature, at 1300-13500C. It is evi-dent that inculcation of ALN in crystal skeleton of ß-Si3N4 is easier since at this temperature interval crystal skeleton of Si3N4 is still in the process of formation. ß-SiAlON was formed at 14500C. Part of boron carbide was transformed into boron nitride in ni-trogen environment and in titanium diboride, which in the case of both composites is in small quantities. Conclusion. The phase composition of the obtained composite provides high physical-technical and performance properties of these nanocomposites. Compression strength-2198 MPa, Bending strength-271 MPa, Thermal expansion coefficient a20-700-3.8 10-6 0C.

Authors and Affiliations

Z. Kovziridze , N. Nijaradze , G. Tabatadze , T. Cheishvili , N. Darakhvelidze

Keywords

Related Articles

Investigating the Impact of Accounting Information System (AIS) on the Organizational Performance: Government and Non-government Banks of Bangladesh

This study focuses on finding out the impact of the accounting information system (AIS) on the performance of government and non-government banks in Bangladesh. For this purpose data were collected from 23 government and...

Analyzing Organizational Culture and Work Environment's Impacts on Employee Knowledge

The Utility Department is a critical component that helps a company's processes work smoothly. The Utility Department is responsible for a number of activities, such as waste treatment, fuel delivery, and electrical supp...

Management of North Jayapura Public Health Center in the Stunting Prevention Program for Children Aged 3-5 Years

This study aims to identify and describe the management of North Jayapura Public Health Center in the stunting prevention program in children aged 3-5 years which covers the availability of input (human resources and sup...

Political Order and Political Decay: From the Industrial Revolution to the Globalization of Democracy, Francis Fukuyama (New York: Farrar, Straus and Girouz, 2014), 658pp.

In this interesting book, Fukuyama keenly insists a strong interest for the study of political institutions. The book presents findings on the origins, evolution and decay of political institutions. A critical question...

Evaluation of Implementation of Adaptive Physical Education Learning During the Covid-19 Pandemic in SLB Yogyakarta City

This study aims to determine the results of the evaluation of context, input, process, product implementation of adaptive physical education learning during the Covid-19 pandemic at Special Schools in Yogyakarta City. Th...

Download PDF file
  • EP ID EP735841
  • DOI 10.47191/ijmra/v7-i05-51
  • Views 41
  • Downloads 0

How To Cite

Z. Kovziridze, N. Nijaradze, G. Tabatadze, T. Cheishvili, N. Darakhvelidze (2024). Multifunctional Nanocomposites in B4C-Tic-Tib2-Sic-BN-Al2O3-Sialon-C Carbon Fiber System for Armor Fillets, Turbine Discs and Wings, High-Temperature Wear Resistant Nodes. International Journal of Multidisciplinary Research and Analysis, 7(05), -. https://europub.co.uk/articles/-A-735841