Nanomaterials as Innovative Technology for Corrosion Control in Petroleum Fields
Journal Title: Petroleum & Petrochemical Engineering Journal - Year 2017, Vol 1, Issue 6
Abstract
In oil production plants, many cases of extensive corrosion have occurred in production tubing, valves, and in flow lines from the wellhead to the processing equipment. The reason for this is that oil and gas from the well contain varying amounts of water, which can be precipitated as a separate phase in contact with the material surface, and that this water contains gases such as CO2 and possibly H2S, as well as salts [1]
Authors and Affiliations
Amal Hamdy Aoud Allah Khaleel
Keywords
Related Articles
- EP ID EP597062
- DOI -
- Views 62
- Downloads 0
Accidental Release of So2 from a Petroleum Refinery due to Power Outage
In normal condition, the petroleum refinery plant in Sriracha, Chonburi, Thailand emits 38.05 g/s of SO2 into the environment. However, if there is a power outage, the same refinery plant emits 16911 g/s of SO2 into the...
A New Cubic Equation of State for Improved Liquid Density Prediction
Hydrocarbon fluid phase behaviours have numerous implications in natural gas and petroleum engineering and are often predictable from equations of state (EOSs). Equations of state methods are far less expensive (in terms...
Efficient Clean – up of Oil Spills using Magneto - Rheological (MR) Fluid
Oil spills causes marine accidents and natural clamities.8 billion barrels of oil are spilled each year. There are lots of methods available for oil spill recovery.
Polymer Injection as a Possible EOR Method for a Fractured Granite Basement Reservoir in the Cuu Long Basin, Vietnam
During the last 25 years more than 85% of Vietnam oil production have come from the fractured granite basement (FGB) reservoirs in the Cuu Long basin, located in the southern offshore of Vietnam. Among all the discovered...
Synthesis and Evaluation of Multifunction Co-Polymer as Lubricating Oils Additives
α - Olefin derivatives are one of a variety of techniques have been employed in order to reduce problems caused by the crystallization of paraffin during the production and/or transportation and improved of properties of...