A Multi Response Optimization of Machining Parameters For Surface Roughness & MRR In High Speed CNC Turning of EN-24 Alloy Steel Using Response Surface Methodology
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 3, Issue 9
Abstract
In Manufacturing sector Turning is the most common process used to remove material from cylindrical workpiece & produce smooth surface finish on the workpiece. In turning process Material removal rate & Surface roughness are the important performance characteristics to be considered which is affected by several factors such as spindle speed, cutting tool material, feed rate, depth of cut, Nose radius cutting tool, coolant and work material characterstics. Alloy Steel EN-24 is a medium carbon steel which is used in manufacturing of aircraft Automotive & axles components, Heavy duty Gears, Shafts, Spindles, Studs, collets, Pins, bolts, sprockets, couplings, pinions & pinion arbors. In this research Response surface methodology (RSM) was applied to determine the optimum machining parameters leading to minimum surface roughness maximum MRR in turning process. In this research spindle speed, depth of cut & feed rate are considered to be main parameters for turning on Alloy Steel. Through multi response optimization the optimum value of the surface roughness (Ra) comes out to be 1.46389 µm for MRR is 403.458 mm3/sec. It is also concluded that feed rate & depth of cut are the major significant factor affecting surface roughness & MRR.
Authors and Affiliations
Puneet Saini
Keywords
Related Articles
- EP ID EP100719
- DOI -
- Views 71
- Downloads 0
Rheological Study of Petroleum Fluid and Oil-in-Water Emulsion
The rheological behavior of two types of crude oil and oil-in-water (o/w) emulsion were thoroughly studied. These rheological properties were investigated including steady flow behavior, shear stress, shear rate,...
Design and Control of Internet of Things Enabled Wireless Sensor Network
In this paper, we have reported an effective implementation of Internet of Things used for monitoring and control of regular domestic conditions by means of low cost sensor network. The interconnecting mechanisms...
Increasing Wind Turbine Efficiency by Reducing Tower Shadow Effect and Scouring Effect
This work is intend to minimize the tower impact on the turbine blade aerodynamics, structural behavior and the oscillating nature of the frequency so called tower “shadow effect”. A horizontal axis wind turbine a...
WEIGHT LOSS CORROSION STUDIES OF ALUMINIUM-7075 ALLOY REINFORCED WITH SILICON CARBIDE PARTICULATES COMPOSITES IN ACID CHLORIDE MEDIUM
The aim of the research work to investigate the corrosion behaviour of Silicon Carbide(SiC) reinforced aluminium 7075 metalmatrix composites (MMCs) in acid chloride solution using weight loss method. The composite...
A PAPER ON A COMPARATIVE STUDY BLOCK TRUNCATING CODING, WAVELET, FRACTAL IMAGE COMPRESSION & EMBEDDED ZERO TREE
Many different image compression techniques currently exist for the compression of different types of images. Image compression is fundamental to the efficient and cost-effective use of digital imaging technology a...