A review of thermographic techniques for damage investigation in composites
Journal Title: Frattura ed Integrità Strutturale - Year 2014, Vol 8, Issue 27
Abstract
The aim of this work is a review of scientific results in the literature, related to the application of thermographic techniques to composite materials. Thermography is the analysis of the surface temperature of a body by infrared rays detection via a thermal-camera. The use of this technique is mainly based on the modification of the surface temperature of a material, when it is stimulated by means of a thermal or mechanical external source. The presence of defects, in fact, induces a localized variation in its temperature distribution and, then, the measured values of the surface temperature can be used to localize and evaluate the dimensions and the evolution of defects. In the past, many applications of thermography were proposed on homogeneous materials, but only recently this technique has also been extended to composites. In this work several applications of thermography to fibres reinforced plastics are presented. Thermographic measurements are performed on the surface of the specimens, while undergoing static and dynamic tensile loading. The joint analysis of thermal and mechanical data allows one to assess the damage evolution and to study the damage phenomenon from both mechanical and energetic viewpoints. In particular, one of the main issues is to obtain information about the fatigue behaviour of composite materials, by following an approach successfully applied to homogenous materials. This approach is based on the application of infrared thermography on specimens subjected to static or stepwise dynamic loadings and on the definition of a damage stress, D, that is correlated to the fatigue strength of the material. A wide series of experimental fatigue tests has been carried out to verify if the value of the damage stress, sigmaD, is correlated with the fatigue strength of the material. The agreement between the different values is good, showing the reliability of the presented thermographic techniques, to the study of composite damage and their fatigue behaviour.
Authors and Affiliations
Laura Vergani, Chiara Colombo, Flavia Libonati
Keywords
Related Articles
- EP ID EP151916
- DOI 10.3221/IGF-ESIS.27.01
- Views 56
- Downloads 0
Advanced techniques for estimation of the tensile fracture toughness of adhesive joints
Adhesive bonding has become more efficient in the last few decades due to the adhesives developments, granting higher strength and ductility. As a result, adhesives are being increasingly used in industries such a...
A micromechanical approach for the micropolarmodeling of heterogeneous periodic media
Computational homogenization is adopted to assess the homogenized two-dimensional response ofperiodic composite materials where the typical microstructural dimension is not negligible with respect to thestructural...
Mechanical behavior of a sandwich with corrugated GRP core: numerical modeling and experimental validation
In this work the mechanical behaviour of a core reinforced composite sandwich structure is studied. The sandwich employs a Glass Reinforced Polymer (GRP) orthotropic material for both the two external skins and t...
A numerical study of squeeze-film damping in MEMS-based structures including rarefaction effects
In a variety of MEMS applications, the thin film of fluid responsible of squeeze-film damping results to be rarefied and, thus, not suitable to be modeled though the classical Navier-Stokes equation. The simplest w...
Fatigue crack paths under the influence of changes in stiffness
An important topic of the Collaborative Research Centre TRR 30 of the Deutsche Forschungsgemeinschaft (DFG) is the crack growth behaviour in graded materials. In addition, the growth of cracks in the neighbou...