A REVIEW ON DESIGN, ANLYSIS AND MATERIAL OPTIMIZATION OF HIGH SPEED HELICAL GEAR BY CHANGING DEFFERENT DESIGN PERAMETERS USING FEA APPROACH
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 0, Vol 4, Issue 10
Abstract
Gears are one of the most critical components in mechanical power transmission systems. The bending and surface strength of the gear tooth are consider to be one of the main contributors for the failure of the gear in gear set. The three dimensional solid model can be generated in pro E. This model is imported in ansys and then contact stress and bending stress can be calculated in ansys for deferent face width and helix angle. Contact stress and bending stress can also be calculated by hertz, lewis and AGMA equation. Bending stress can be occur in the root of gear and contact stress can be occur between meshing of two gear. Finally these two methods bending and contact stress results both are compared with each other for deferent face width and helix angle Different material can also be tried for wight and cost optimization. And also to increase corrosion resistance which might be cause of failure.
Authors and Affiliations
Bhatt Parth Jitendrabhai*
Keywords
Related Articles
- EP ID EP163983
- DOI -
- Views 68
- Downloads 0
Effect of Adding Alcohols, Superficial Gas Velocity and Solid-Suspended on Design Parameters in Circulation Loop Bubble Columns
The influence of superficial gas velocity and the addition of alcohols with respect to oxygen mass transfer (KLa), and gas hold-up (ɛg) in circulation loop bubble column using three aqueous solutions of 10% concen...
OBJECT DETECTION AND TRACKING ALGORITHM FOR LOW VISION VIDEO
We propose a general framework for Object Recognition into regions and objects. In this framework, the detection and recognition of objects proceed simultaneously with image segmentation in a competitive and coope...
ELECTRIC CHARGES ON PHOSPHOR PARTICLES DETERMINE FEATURES OF LIGHTED FL TUBES
The lighting devices such as coil-EEFL tube, HCFL tube, PDP and flat fluorescent lamp (FFL) use the opaque phosphor screen as the transducer from the UV lights to the visible lights. The phosphor screens as the tr...
Universal Scrambler by using Verilog HDL
Universal Scrambler (Randomizer) is a device that is used for encoding the message at the transmitter to build the message at the receiver by using decoding techniques,where encryption is referred in the digital a...
Vehicle Security and Accident Information System
The main aim of this project is to offer an advance security system in CAR, which consists of a face detection subsystem, a GPS module, a GSM module and a control platform. The face detection subsystem can detect...