A Review on the Effect of Process Parameters on Different Output Parameters During Machining of Several Materials
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 3, Issue 3
Abstract
It is important to view machining, as well as all manufacturing operations, as a system consisting of the workpiece, the tool and the machine. Machinability is the relative susceptibility of a material to the machining process. The ease with which a metal can be machined is one of the principle factors affecting a product's utility, quality cost. The usefulness of a means to predict machinability is obvious. Depending on the application, machinability may be seen in terms of tool wear rate, surface roughness, hardness, chip shape and several other benchmarks. In this paper an attempt has been made to consolidate some of the aspects of output parameters during machining of different materials.
Authors and Affiliations
Ajit Kumar Senapati
Keywords
Related Articles
- EP ID EP127698
- DOI -
- Views 71
- Downloads 0
PERFORMANCE AND EMISSION CHARACTERISTICS OF EUCALYPTUS OIL AND DIESEL BLEND IN FOUR STROKE SINGLE CYLINDER DIESEL ENGINE
Diesel engines are highly preferred for transportation since they are highly efficient and durable in the long run. However, because of lack of crude oil reserves, fuel cost and emission norms, alternative fuels are of...
TO Convert Based on DC–DC Based on 3SSC and VMC
Proposed on this work as a viable solution to step-up a low battery voltage into a high voltage dc link. This converter is suitable for non-isolated on-line UPS systems with common neutral connection that improves...
Sensor Network for Monitoring Physiological Signals of Multiple Patients Using can Bus
The project makes use of CAN technology to sense and transfer the physiological signals and parameters of a patient’s body. With the help of the project, efficient medical services can be provided to the patient i...
EXPERIMENTAL STUDY OF EFFECT OF ARTIFICIAL SAND AND AGGREGATES ON COMPRESSIVE STRENGTH AND WORKABILITY OF CONCRETE
Any Civil Engineering Structure must rest on a Structures are founded with concrete and steel materials mainly. Traditionally, concrete is mixture of cement, sand and aggregate. The most commonly used fine agg...
A Study and Future of 3D Internet
The Internet is a living, dynamic “wizard” who is constantly and rapidly evolving, reshaping and transforming and consequently .The world wide web which has started as a document bank is rapidly transforming to f...