Advanced Automation System in Industrial Applications Using PIC Microcontroller and GSM
Journal Title: International Journal of Modern Engineering Research (IJMER) - Year 2014, Vol 4, Issue 7
Abstract
The main aim of this paper is to design and develop an advanced automation system in the industries. In this technique we are using the GSM modem which have the SIM card present in it, the user can send message on the 10 digit SIM number using the cell phone from any part of the world. The micro controller is programmed using the embedded C. when the user will send the message to a particular device that particular device will be on or we can also off the device. Example if the motor is in over voltage, under voltage, over current in that time the microcontroller will trip the circuit and give the message feedback to the user. The micro controller will read the temp from the sensor and it will display the same on the LCD when the incoming temp crosses the set limit the micro controller will turn OFF the device and will send the message to owner using the SIM card present in the GSM modem. We can also check the continuous status of the device.
Authors and Affiliations
K. Siva Prasad , B. Kumuda , U. Shantha Kumar , M. Ashok Kumar
Keywords
Related Articles
- EP ID EP162983
- DOI -
- Views 131
- Downloads 0
Secure Ticket- Based Anonymity and Traceability in Wireless Mesh Networks
Wireless Mesh Network (WMN) is a promising technology to meet the challenges of the present generation for providing flexible adaptive and reconfigurable architecture. WMN provides cost-effective business solutions...
Performance and Analysis of Video Compression Using Block Based Singular Value Decomposition Algorithm
Abstract: This paper presents analysis of video compression based on block SVD Algorithm. Video compression is a process of efficiently coding digital video to reduce the number of bits required in representing vid...
Enhancement of Power Quality by UPQC Device in SCIG Wind Fram to Weak Grid Connection
In the last years, the wind power generation incorporated into standard grids has been increased significantly. This situation forced the revision of grid connection code requirements, to guarantee the reliability...
Stress Analysis of Precast Prestressed Concrete Beams during Lifting
The use of long span prestressed beams in bridge construction is very common. Even if the sections are economical the erection of the beam still poses a challenge in construction. Not much work has been done in the analy...
Theoretical and graphical analysis of abrasivewater jetturning
Recent developments in the materials technology, as well as the requirements for more complex and economic machining processes, demand new approaches to the machining of materials. The machining of lightweight ma...