An Empirical Study on the Ways of improvement in Chiller Efficiency by Variation of Various Performance Parameters
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 3, Issue 5
Abstract
As well known, A chiller is a refrigeration system that cools a process fluid typically water, which is further used in commercial and industrial ways for process cooling or air-conditioning. With the help of such systems water can be cooled to temperatures as low as 5°C (~40°F) and pumped through a hydraulic circuit to reach the process equipment or the air handling units. Rather than water some other suitable primary and secondary refrigerants are also be used for such refrigeration purposes. For still lower temperatures glycol or brine solution may be used (also known as secondary refrigerants). A chiller would use either a vapour compression or absorption cycle to cool. Once cooled or chilled water is used in air-conditioning applications for cooling/dehumidification and thus creating comfortable and productive environments. A large amount of power is required to operate these system. This paper represents the possible and suitable ways of improving the performance of such systems because of maximization in performance is the key requirement of current running refrigeration chillers for energy saving point of view.
Authors and Affiliations
Shabahat Husain*1
Keywords
Related Articles
- EP ID EP163841
- DOI -
- Views 63
- Downloads 0
MOSAICING IN VARIOUS IMAGES: A SURVEY
K-means clustering and watershed are the key techniques used as a combination, Edge detection procedure and region, merging are also used. Merging method based on mean gray values and edge strengths (T1, T2) are u...
NUMERICAL ANALYSIS OF THE PERFORMANCE CHARACTERISTICS OF CONICAL ENTRANCE ORIFICE METER
Orifice meters are one of the most widely used flow meters in industrial applications due to their simplicity, accuracy and economy. However, the sharp edge orifice plates cannot be used for low Reynolds number fl...
RECONSTRUCTION OF SURFACE FOR IMAGE PROCESSING
In this paper we are going to use a physically motivated method for surface reconstruction that can recover smooth surfaces from noisy and sparse data sets. No orientation information is required. By a new techniq...
THE TARGET TRACKING IN MOBILE SENSOR NETWORKS
Tracking mobile targets using wireless sensor networks is a potential surveillance application of practical importance suitable for military as well as civilian fields. It can be used for guiding robots in hard to...
CONVERTER DESIGN USING MPPT TECHNIQUE
In this paper Maximum Power Point Tracking (MPPT) control mechanism with cuk converter is presented. Main aim of the project is the use of cuk converter along with a Maximum Power Point Tracking control mechanism. Th...