An Experimental Investigation of Effect of Cutting Fluids on Chip Formation and Cycle Time in Turning of EN-24 and EN-31 Material
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 3, Issue 11
Abstract
In metal cutting industries it is essential to study the chip morphology during machining process. The chip formation is not only depending upon the work piece material but even on the cutting fluids and grain structure of the materials. Cutting fluids have seen extensive use and have commonly been viewed as a required addition to high productivity and high quality machining operations. This experiment is to determining the effect of cutting fluids and cutting parameters on chip formation mode and cycle time in turning of EN-24 and EN-31 material. The above operation has been carried out in dry cutting condition, Flood application of cutting fluids. Cutting fluids like soluble oil and palm oil used in the present work. The cutting operations were carried out on a conventional lathe machine there by making turning operation with uncoated carbide cutting tool at different spindle speed(n) of 210rpm, 450rpm and 750rpm.Also feed(f) of 0.1rev/min to 0.2rev/min. Depth of cut is kept constant at 1.5mm. By using the vegetable oil we can improve the surface finish, metal removal rate and to reduce the environmental effects. After conducting these experiments it was recorded chip morphology and cycle time value for each fluid under different cutting conditions. It was observed light color chips with segmented form in vegetable based oil at lower cutting conditions for each material.
Authors and Affiliations
Prasanna P Kulkarni
Keywords
Related Articles
- EP ID EP100698
- DOI -
- Views 76
- Downloads 0
Study on Economical Aspect of R.C.C Beam Slab Construction and Grid Slab Construction
This paper presents the comparison of R.C.C Beam Slab, One-Way Continuous Slab and Grid Slab. This work includes the design and estimates for R.C.C Beam Slab, One-Way Continuous Slab and Grid Slab. The aim of this...
Thermal analysis of baffled shell and tube type EGR cooler for different types of tubes using CFD
Exhaust Gas Recirculation (EGR) technique using EGR cooler reduces the NOx content from the tailpipe emission of Diesel engines. Commercial computational fluid dynamics (CFD) code is used to solve and simulate the...
A STUDY ON MICROARRAY GENE EXPRESSION DATA AND CLUSTERING ANALYSISAfter genome sequencing, DNA microarray analysis has become the most widely used functional genomics approach in the bioinformatics field. Biologists are hugely weighed down by the massive amount of unparalleled qualities of genome-wide data produced by the DNA Microarray experiment.Clustering is the process of grouping da
REVIEW PAPER ON INVESTIGATION OF DIRECT EVAPORATIVE COOLER WITH HEMP AND ABACA COOLING PAD MATERIALS
Evaporative cooling is environment friendly and more efficient air cooling method. The efficiency of evaporative cooling systems increases with an increase in temperature and decrease in humidity. Therefore in hot and d...
STUDY OF DIFFERENT MOBILE APPLICATIONS
Humans are social creatures and hence crave social interaction more than any other, many claim that Humans, when born, are lot more frail than many other animals therefore nature has set up an "attachment" system...