Analysis of Active and Passive Suspension System of Half Car model using MatlabTM - Simulink
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 3, Issue 6
Abstract
The concept of using an active suspension system for vehicles is to provide the best performance of car controlling. A fully active suspension system aim is to control the suspension over the range of excitation signals. It is considered to be the way of increasing load carrying, handling and ride quality. The purpose of this research paper is to construct a half car model with a linear control design which is the Proportional Integral Derivatives (PID).This paper compares the passive suspension response with active suspension response. The response of the system is simulated by MATLAB™ Simulink®. To evaluate the performance of this system, PID is chosen as a control strategy and will be compared with the uncontrolled, by performing a MATLAB™ Simulink® simulation
Authors and Affiliations
Ajay Dusane,
Keywords
Related Articles
- EP ID EP122392
- DOI -
- Views 85
- Downloads 0
Studies on Low Cost LED Based Solar Cell for Emergency Lighting
This paper describes some studies on low cost solar cell for generation of electrical common red coloured LED. The cost of LED based solar cell is relatively much lower as compare to commercially available photo-voltai...
PERFORMANCE ENHANCEMENT OF MOBILE AIR CONDITIONING SYSTEM USING VARIABLE GEOMETRY MICRO CHANNEL HEAT EXCHANGER (MCHX)
Due to stiff competition among the Original Equipment Manufacturer (OEM’s), the Comfort, Fuel efficiency & Safety are the key factors that drive the vehicle business; in that context A/c plays an important part for...
DATA HIDING BY CODEWORD SUBSTITUTION (ENCRYPTED H.264/AVC VIDEO STREAM)
Digital videos are the very popular because of their frequency on their internet. There are various techniques are present for hiding private data in videos. Digital video needs to be stored in encrypted format. For the...
FPGA Implementation of NOR Flash Storage Controller
Flash storage memory devices are Nand and NOR types which are widely used in data storage application in computers and solid states drives. Flash are nonvolatile and electrically erased and reprogrammed. A flash m...
OPTIMIZATION OF CHROMIUM BIOSORPTION BY AGERATUM CONYZOIDES LEAF POWDER FROM AQUEOUS SOLUTIONS: EQUILIBRIUM KINETICS AND THERMODYNAMICS
The study on low - cost adsorbent such as Ageratum conyzoides leaf powder was used to remove chromium from aqueous solutions. Experiments were conducted in batch mode to observe the influence of various parameters...