Analysis Of Geomechanical Properties In Well Design And Well Optimization

Abstract

 Main aspect in wellbore instability is the selection of an appropriate rock failure criterion. This criterion i only the maximum and minimum principal stresses σ 2 has no influence on the rock strength. When Mohr experimental evidence from conventional triaxial test ( Coulomb criterion has been extensively used to represent rock failure under the polyaxial stress state ( σ 2 = σ 3 ). In contrast to the prediction of redistribution Mohr suggest that σ 2 thus indeed have a strengthening effect. This research shown that Mohr only represent, that triaxial stress state ( linear failure criterion has been justified by experimental evidence from triaxial tests as well as polyaxial test. It is natural extension of the classical Mohr only represents rock failure under triaxial stress state, it is expected to be conservative in predicting well bore instability. The 3D analytical model employed by Mogi to calculate the stresses. A model was developed of the formation was found to be 0.9180psi/ft and decreases to 0.420psi/ft at depth 7300ft. The membrane efficiency of the formation increases from 0.698 to 0.719 at the depth considered

Authors and Affiliations

Odumosu M. O

Keywords

Related Articles

 NO MORE A MATHEMATICAL IMPOSSIBILITY – SQUARE ROOT OF Pi FOUND (117th Method)

 Pi is a geometrical constant. Its official value is 3.14159265358… March 1998 discovery says Pi value is 3.14644660941…. With the official number square root of Pi and squaring of circle are impossible. With 3.14...

 NONDESTRUCTIVE DIAGNOSIS OF A PARTICLE ACCELERATOR FOR MEDICAL USE

 Our goal is to use thermal imaging to diagnose a particle accelerator used in medicine. This technic can track its operating status and detect breakdowns and failures. The accelerator is used in the Regional Cance...

 CASTOR SEED BIO -TRANSFORMER OIL AS AN ALTERNATIVE TO CONVENTIONAL TRANSFORMER OIL

 In search of solution to the harmful ecological problems due to toxicity and non-biodegradability posed by conventional transformer insulation oil (mineral oil), the production of transformer oil from castor s...

Sweep Sin Simulation for Exhaust System

Truck chassis forms the structural backbone of a heavy commercial vehicle. When the truck travels along the road, the chassis is subjected to vibration induced by road roughness and excitation by vibrating components m...

Landslide Monitoring System Based on Dual Receiver Measurements

 Many approaches have been used to monitor landslides. The detection techniques vary and depend on the range between the area of interest and receiving devices. For ranges up to a few hundred meters, the laser ligh...

Download PDF file
  • EP ID EP148748
  • DOI -
  • Views 52
  • Downloads 0

How To Cite

Odumosu M. O (30).  Analysis Of Geomechanical Properties In Well Design And Well Optimization. International Journal of Engineering Sciences & Research Technology, 1(4), 143-155. https://europub.co.uk/articles/-A-148748