Commercial Buliding of Reinforced Concrete design
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 3, Issue 5
Abstract
Structural engineering is a field of civil engineering dealing with the analysis and design of the structure that support or resist the loads. Structural engineers are most commonly involved in the design of buildings and large non building structures. Structural engineers must ensure their designs satisfy given design criteria, predicated on safety (e.g. structures must not collapse without due warning) or serviceability and performance (e.g. building sway must not cause discomfort to the occupants). Structural engineers ensure that buildings and bridges are built to be strong enough and stable enough to resist all appropriate structural loads (e.g., gravity, wind, snow, rain, seismic (earthquake), earth pressure, temperature, and traffic) in order to prevent or reduce loss of life or injury. They also design structures to be stiff enough to not deflect or vibrate beyond acceptable limits. In this paper an attempt has been made to analyses and design G+4 commercial building (hospital). We have adopted Limit State Method for analysis and designing the structure. The design is conformation with IS 456-2000. We bear in mind that Structural design should satisfy the ultimate strength, in flexure, shear, compression, tension, torsion, developed under a given system of loads and satisfy the serviceability, which limits deflection and cracking to be within acceptable limit.
Authors and Affiliations
Mr. Mohd Abrar
Keywords
Related Articles
- EP ID EP106255
- DOI -
- Views 97
- Downloads 0
DESIGN AND FABRICATION OF THERMAL CONDUCTIVITY APPARATUS FOR CASHEW NUT
Experiments were conducted for determination of various physical properties of Vengurla-4 variety of cashew nut. The diameter or size and sphericity of cashew nut were found to be 21.92 mm and 0.68 respectivel...
High Speed Low Area Pattern Matching Algorithm for Memory Architecture
Pattern matching is one of the most important components for the content inspection based applications of network security, and it requires well designed algorithms and architectures to keep up with the increasing netwo...
DESIGN, MODELING AND SIMULATION OF UNIFIE D POWER QAULITY CONDITIONER IN MULTI BUS SYSTEM
The Unified Power Quality Conditioner (UPQC) is a versatile device and it mitigates both load current and supply voltage problems, simultaneously . This device combines a shunt active filter together with a seri...
COMPARATIVE STUDY ON DESIGN AND ANALYSIS OF MULTISTOREYED BUILDING (G+10) BY STAAD.PRO AND ETABS SOFTWARE’S
Structural Analysis is a branch which involves in the determination of behaviour of structures in order to predict the responses of real structures such as buildings, bridges, trusses etc. Under the improvement of...
Weather Parameters Monitoring based on Zigbee and AVR Microcontrollers
This paper focuses on using Atmel AVR series of microcontrollers and TarangZigbee module to monitor the Environmental parameters such as temperature, humidity, CO2, and moisture level of an Environment wirelessly.Nowad...