Comparative Analysis of Various Condenser in Vapour Compression Refrigeration System
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 3, Issue 9
Abstract
The present work is to analyze performance of refrigeration system on three condensers viz. micro-channel, round tube and coil tube using R134a and R290 refrigerants. These three condensers are kept in parallel with other components of refrigerating unit while construction.The performance of refrigeration system is checked for each condenser at various cooling loads in the range from 175 W to 288 W.The performance of the condenser is measured for whole refrigeration unit in terms of coefficient of performance, efficiency of the system, heat rejection ratio, heat rejected from condenserand heat transfer coefficient. The experimental data of heat transfer coefficient is validated with existing correlation.The result shows that for both refrigerants R134a and R290, coefficient of performance increases with increase in heating load. From the analysis of three condensers, coefficient of performance of refrigeration system using microchannel condenser is more compared to round tube and coil tube condenser. The coefficient of performance of the system with the microchannel condenser is found 15.3% higher than that with the round tube condenser and 8% higher than that with the coil tube condenser. AlsoR134a gives better cooling effect than the R290 for all operating condition.
Authors and Affiliations
Patil Deepak P
Keywords
Related Articles
- EP ID EP148348
- DOI -
- Views 70
- Downloads 0
DESIGN AND ANALYSIS OF U-SLOT LOADED CIRCULAR MICROSTRIP PATCH ANTENNA FOR DUAL FREQUENCY WIDE BAND OPERATION
The paper proposes an effective design methodology for Circular Microstrip Patch Antenna loaded with U-slot. The performance parameters of the antenna designed on FR-4 (lossy) substrate are obtained and compar...
Savitzky-Golay Filter Based Vertical Handoff between LTE and WIFI Network
Heterogeneous network is a network connecting computers and other devices with different operating systems. Wireless networking is becoming an increasingly important and popular way of providing global informatio...
Sweep Sin Simulation for Exhaust System
Truck chassis forms the structural backbone of a heavy commercial vehicle. When the truck travels along the road, the chassis is subjected to vibration induced by road roughness and excitation by vibrating components m...
REVERSE ENGINEERING OF IC ENGINE CONNECTING ROD OF HERO- HONDA MOTORCYCLE ENGINE
The connecting rod is modeled from cloud points obtained by laser beam scanning. The points are joined by lines and then creating bounding areas and filling the volume.The laser beam scanning method for inspecting...
EVALUATION OF DROUGHT CHANGES OF ISFAHAN CITY BASED ON THE BEST FITTED PROBABILITY DISTRIBUTION FUNCTION
Generally, in arid and semi-arid region due to climatic conditions, a good match between conventional agriculture, soil and water conditions as well. Personal experiences of rural and old traditions teaches them h...