CONDITION MONITORING AND DYNAMIC BALANCING OF A HOT AIR CIRCULATION BLOWER BY VIBRATION TOOL
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 5, Issue 3
Abstract
Over the years machinery health management has become vital part of the plant operation. Earlier day’s machinery maintenance is only focused on reactive maintenance. In later stages, Vibration Monitoring is a critical component of any Predictive Maintenance (PdM) Practices. Vibration Monitoring and subsequent analysis has helped in identifying an earlier consequence of breakdowns. [1]The idea of performing Predictive Maintenance to perform maintenance on the machines they exhibit signs of mechanical failure has become known as Condition Based Maintenance (CBM). Condition Based Monitoring System (CBMS) is proven technology to be less costly than the failure. A simple Consequence of Failure Analysis (CFA) is made to justify preventive maintenance activities. This evolutionary process of machinery maintenance has allowed the maintenance operation to more “Proactive” than reactive in their maintenance tasking. This paper pertains on a Main Circulation Blower which extremely critical for their production. We have observed the machinery health condition based on vibration measurements and vibration analysis which really helped us in identifying a failure sequence. In-situ dynamic balancing of main circulation blower ,which focuses the importance vibration analysis to reduce the induced vibrations from unbalance forces and Significant reduction in the vibration levels and which increased the machinery availability for production.
Authors and Affiliations
Chebolu Rohini Kumar
PWM CONTROL CHOPPER FED CLOSED LOOP DRIVE FOR DC MOTOR USING MICROCONTROLLER
The main characteristics of an electric drive system are reliability, variable speed, high performance are used due to which it can be easily control. The speed control of dc motor is very important because protec...
Experimental Investigation of Material Removal Rate on H-13 Using Powder Metallurgy and Conventional Electrodes
Electric discharge machining is most widely used method for machining materials which are used mostly for making tools such as Die steel, tool steel which are difficult to machine by simple methods. It was found t...
Implementation of Image Steganography Using FPGA
Steganography is the art and science of communicating in a way which hides the existence of the communication. Unlike Cryptography, where the attacker is allowed to detect, intercept, modify messages without bein...
DTLS & COAP Based Security For Internet of Things Enabled Devices
The Internet of Things (IoT) enables a wide range of application scenarios with potentially critical actuating and sensing function, e.g., in the e-health domain. For communication at the application layer, resour...
EXPERIMENTAL INVESTIGATIONS ON FLUID FLOW CHARACTERISTICS OF SINGLE PHASE LIQUID FLOW THROUGH CIRCULAR MICROCHANNELS
Microchannels which are light in weight, smaller in size, handle low amount of coolants and provide higher surface area to volume ratio give higher heat transfer coefficients are efficient cooling devices for vari...