Creating a Virtual Touch Screen Using MEMS and Flex Sensors: A Survey
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 3, Issue 11
Abstract
The objective of this project is to create an interactive virtual touch screen. The technologies used here are microelectromechanical- systems (MEMS), Flex sensors, Zigbee network protocol. MEM is the technology of very small devices which merges at the Nano-scale into Nano electromechanical systems (NEMS) and nanotechnology. An accelerometer is used to measure the movement of the hand. Accelerometer is an instrument for measuring acceleration, detecting and measuring vibrations, or for measuring acceleration due to gravity (inclination). They can also be used to measure seismic activity, inclination, machine vibration, dynamic distance and speed with or without the influence of gravity. This is controlled by means of microcontroller. The device is placed in our hands, so that by moving our hand we can control the mouse pointer and clicking options also. This movement control is given to the device or the system in which the applications are to be used. This is done in wireless by means of Zigbee protocol. This protocol device provides various features as the communication distance for Indoor/Urban: up to 133’ (40 m), at Outdoor line-of-sight: up to 400’ (120 m). This has Transmit Power of 2 mW (+3 dB) and its Receiver Sensitivity is about -95 dBm RF and the transmitting and receiving Data Rate is 250,000 bps
Authors and Affiliations
Nivas. R*
Keywords
Related Articles
- EP ID EP132674
- DOI -
- Views 72
- Downloads 0
Effect of Curing Profile on Fly Ash Geopolymer with Slag as Supplementary
The aim of this research is to evaluate the curing temperature at which the fly ash based geopolymer can achieve its best mechanical properties with the presence of supplementary calcium source. Wide range of curi...
EFFECT OF DURATION AND TEMPERATURE OF CURING ON COMPRESSIVE STRENGTH OF FLY ASH BASED GEOPOLYMER CONCRETE
The optimum temperature and duration of curing is essential in geopolymerization reaction to achieve higher strength. As such, fly ash based geopolymer concrete were prepared by varying the curing temperature of 600, 90...
Sybil Attack in Vanet by Neighbourhood Information Passing
In this paper, we will present one of the most applicable forms of Ad-Hoc networks; the Vehicular Ad-Hoc Networks (VANETs). VANET is the technology of building a robust Ad-Hoc network between mobile vehicles and...
Analysis of Centrifugal Pump in Diffuser Vane By Using CFD
pumps, CFD, flow analysis, numerical simulation, radial gab, part load performance. Introduction A centrifugal pump is dynamic machine that uses impeller to increase the pressu They are widely used for liqui...
A Study on Interface Shear Strength Variability and Probability of failure of Land Filled Stability Analysis
Now a day’s failure of modern landfills by slippage of lining materials is common. The majority of failures are controlled by slippage at interfaces between lining components. Information and variability of interf...